Connecting the Units | Connecting the Units |
Connecting the Units
Connecting the Units
Power cable connection
This product | Optical input |
Rear audio output |
|
(Refer to Fig. 4 and Fig. 6.) |
|
Antenna jack |
|
Connection method
1. Clamp the lead. | 2. Clamp firmly with |
| |
| pliers. |
Note
•The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.
Connecting to separately sold power amp
15 cm
Front output
(FRONT OUTPUT)
15 cm
Subwoofer output or non fading output
Connecting cords with RCA pin plugs (sold separately)
Use this for connections when
Power amp (sold separately)
Power amp (sold separately)
(sold separately) 
Refer to Fig. 3 – Fig. 6.
Yellow/black
If you use a cellular telephone, connect it via the Audio Mute lead on the cellular telephone. If not, keep the Audio Mute lead free of any connections.
Yellow |
|
|
|
|
| |
Fuse holder | ||||||
To terminal always supplied | ||||||
|
|
|
|
| ||
with power regardless of |
|
|
|
|
| |
ignition switch position. |
|
|
|
|
| |
Power supply side
Ground side
Blue/white
To system control terminal of the power amp or
Parking brake switch
(SUBWOOFER OUTPUT or
NON-FADING OUTPUT)
Rear audio output
(Refer to Fig. 4 and Fig. 6.)
Optical input
This product |
|
Antenna jack |
|
(Refer to Fig. 2.) | System remote control |
|
you have the separately available amplifier.
Blue/white
To system control terminal of the power amp or
(max. 300 mA 12 V DC).
System remote control
Orange/white
To lighting switch terminal.
Red
To electric terminal controlled by ignition switch (12 V DC) ON/OFF.
Fuse resistor
Fuse resistor
Front speaker
Left
Rear speaker
White
+
≠
White/black
Green
+
Gray |
| |
+ | Front speaker | |
| ||
≠ |
| |
Gray/black | Right | |
Violet | ||
| ||
+ | Rear speaker | |
|
When you connect separately sold
Note
When you connect
+ Subwoofer
≠
Subwoofer
+
≠
≠
Green/black
≠ |
Violet/black |
Left
Right
Black (ground)
To vehicle (metal) body.
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
When you connect separately sold
Fig. 2
Note
Change the initial setting of this product (refer to the Operation Manual). The subwoofer output of this unit is monaural.
+ Front speaker
≠
Front speaker
+
≠
Fig. 3