Pioneer DEH-P7200 operation manual Front Image Enhancer Function FIE, 100 += 160 += 250 Hz

Audio Adjustment

Front Image Enhancer Function (FIE)

The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front imaging by cutting mid- and high-range frequency output from the rear speakers, limiting their out- put to low-range frequencies. You can select the frequency you want to cut.

Precaution:

•When the F.I.E. function is deactivated, the rear speakers output sound of all frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to prevent a sudden increase in volume.

1.Press the AUDIO button and select the F.I.E. mode (FIE) in the Audio Menu.

2. Switch the F.I.E. function ON/OFF with the 5/° buttons.

“ ”

3. Select the desired frequency with the 2/3 buttons.

100 += 160 += 250 (Hz)

Note:

•When the H.P.F. function is ON, you cannot switch to the F.I.E. mode.

•After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu, and adjust front and rear speaker volume levels until they are balanced.

•When the Rear Speaker Lead setting is “Rear SP:S.W”, you cannot switch the F.I.E. mode. (Refer to page 41.)

•Switch the F.I.E. function OFF when using a 2-speaker system.

35