Specifications

Continuous power output is 22 W per channel min. into 4 ohms, both channels driven 50 to 15,000 Hz with no more

than 5% THD.		...................................... 45 W ⋅ 4
Maximum power output		...................................... 45 W ⋅ 4
45 W ⋅ 2 ch/4 Ω + 70 W ⋅ 1 ch/2 Ω (for Subwoofer)
Load impedance
...................... 4 Ω (4 – 8 Ω [2 Ω for 1 ch] allowable)
Preout maximum output level/
output impedance		.................................... 2.2 V/1 kΩ
Equalizer (3-Band Parametric Equalizer)
(Low)		Frequency: 40/80/100/160 Hz
		Q Factor: 0.35/0.59/0.95/1.15
		(+6 dB when boosted)
		Level: ±12 dB
(Mid)		Frequency: 200/500/1k/2k Hz
		Q Factor: 0.35/0.59/0.95/1.15
		(+6 dB when boosted)
		Level: ±12 dB
(High)	Frequency: 3.15k/8k/10k/12.5k Hz
		Q Factor: 0.35/0.59/0.95/1.15
		(+6 dB when boosted)
		Level: ±12 dB
Loudness contour
(Low)	+3.5 dB (100 Hz), +3 dB (10 kHz)
(Mid)	+10 dB (100 Hz), +6.5 dB (10 kHz)
(High)	+11 dB (100 Hz), +11 dB (10 kHz)
		(volume: –30 dB)
HPF
Frequency		50/80/125 Hz
Slope		–12 dB/oct
Subwoofer output
Frequency		50/80/125 Hz
Slope		–18 dB/oct
Gain		±12 dB

System	Compact disc audio system
Usable discs	Compact disc
Signal format	Sampling frequency: 44.1 kHz
Number of quantization bits: 16; linear
Frequency characteristics	.............. 5 – 20,000 Hz (±1 dB)
Signal-to-noise ratio	94 dB (1 kHz) (IHF-A network)
Dynamic range	92 dB (1 kHz)
Number of channels	2 (stereo)

Frequency range	87.9 – 107.9 MHz
Usable sensitivity	10 dBf
(0.9 ∝V/75 Ω, mono, S/N: 30 dB)
50 dB quieting sensitivity ....	15 dBf (1.5 ∝V/75 Ω, mono)
Signal-to-noise ratio	70 dB (IHF-A network)
Distortion	0.3% (at 65 dBf, 1 kHz, stereo)
Frequency response	30 – 15,000 Hz (±3 dB)
Stereo separation	40 dB (at 65 dBf, 1 kHz)
Selectivity	70 dB (2ACA)
Three-signal intermodulation
(desired signal level)	30 dBf
(two undesired signal level: 100 dBf)

Note:

•Specifications and the design are subject to possi- ble modification without notice due to improve- ments.

489