Pioneer Explore Initial Settings for Your Car Stereo System

Initial Settings

Adjusting initial settings

1

Initial settings lets you perform initial set up of different settings for this unit.

1FUNCTION display

Shows the function status.

1Press SOURCE and hold until the unit turns off.

2Press FUNCTION and hold until time appears in the display.

3Press FUNCTION to select one of the initial settings.

Press FUNCTION repeatedly to switch between the following settings:

CLOCK—WARN—AUX—DIM—BRIGHT—SW—

TEL

Use the following instructions to operate each particular setting.

•To cancel initial settings, press BAND/ESC.

•You can also cancel initial settings by holding down FUNCTION until the unit turns off.

Setting the time

This is used to set the time on the unit’s clock display.

1Press FUNCTION to select the CLOCK. Press FUNCTION until the time appears in the display.

Section

08

2 Select the portion of the time display you
wish to set with 2/3.	English
Pressing 2/3 will select a portion of the clock
display:
HOUR—MINUTE
As you select portions of the clock display the
portion selected will blink.
	Español
3 Select the correct time with 5/∞.
Pressing 5 will increase the selected hour or
minute. Pressing ∞ will decrease the selected	Deutsch
hour or minute.
Switching the warning tone
If the front panel is not detached from the head
unit within five seconds of turning off the igni-	Français
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press FUNCTION to select WARN.
Press FUNCTION repeatedly until Warning
appears in the display.	Italiano
and off and that status will be displayed (e.g.,
2 Select WARN on or off with 5/∞.
Pressing 5/∞ will switch Warning between on
Warning :ON).
	Nederlands

En 37