WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE.
Connection method
1. Clamp the lead. | 2. Clamp firmly with |
| |
| pliers. |
English
Español
Note:
•The position of the parking brake switch depends on the vehicle model. For details, consult the vehicle Owner’s Manual or dealer.
Light green
Used to detect the ON/OFF status of the parking brake.
This lead must be connected to the power supply side of the parking brake switch.
Power supply side
Ground side
Blue/white
When the source is switched ON, a control signal is output.
To system control terminal of the power amp (max. 300 mA 12 V DC).
Parking brake switch
Deutsch Français Italiano
With a 2 speaker system, do not connect anything
to the speaker leads that are not connected to speakers.
Fig. 4
Nederlands
6