Pioneer M600 Before turning on the power, Playback, Protection circuit, Event of malfunction

Page 14

To begin playback

Before turning on the power

Make sure that the input terminals and output terminals are securely connected.

Playback

111Turn the volume knob of the Pre-Amplifier to its lowest setting.

222Turn the Pre-Amplifier’s power on.

333Turn the TAD-M600’s power on.

The power indicator will light red for eight seconds. The light will turn yellow once the TAD-M600 is ready to operate. Use the Pre-Amplifier’s volume knob to adjust the volume.

444To turn off the unit after use, first turn the volume knob of the Pre-Amplifier to its lowest setting, then turn off both the Pre-Amplifier and the TAD-M600.

Protection circuit

The TAD-M600 is provided with a built-in automatic protection circuit to prevent electrical damage to the amplifier and speakers. When the protection circuit operates, the power indicator will light red, and no sound will be produced from the speakers. The protection circuit may operate in the following circumstances:

''When power is first turned ON

In order to silence potential noise during startup, the muting circuit operates for eight seconds; the indicator lights red during this time.

''In event of malfunction

In the event of a short-circuit between speaker terminals, excessive load, or abnormal heat generation, the protection circuit will operate and the indicator will light red. The protection circuit is of the auto reset type. In the event the protection circuit operates due to a malfunction, turn off the power, eliminate the source of the malfunction, and turn the power on again.

14

Image 14
Contents Page Ventilation Caution Important Notice TAD-M600Decibel Level Example To establish a safe levelOnce you have established a comfortable sound level Contents Features IntroductionChecking what’s in the box Controls and displaysHow to install Installation and ConnectionsInstallation Remove the spike base template and place the TAD-M600Adjusting the spike height Replace the cover removed in stepInput Balanced terminal XLR-3-31 equivalent Connecting your equipmentConnecting to the Pre-Amplifier Bi-wire connection Pre-Amplifier To balance output terminalConnecting the speaker cable Connecting to the speaker systemHow to connect the speaker system Turn the speaker terminal knob to the leftPower cord 2-pin supplied Connecting the power cordHow to connect the power cord Playback Before turning on the powerWhen power is first turned on Protection circuitTroubleshooting Symptom Possible cause Remedy##Accessories Specifications##Power section/miscellaneous ##Amplifier SectionMaintenance Technical Audio Devices LABORATORIES, INC

M600 specifications

The Pioneer M600 is an advanced multi-functional amplifier designed for audiophiles who demand high performance and versatility in their audio systems. Known for its innovative technologies and robust construction, the M600 delivers exceptional sound quality and reliability, making it a popular choice among music enthusiasts.

One of the most notable features of the M600 is its Class D amplification technology. This cutting-edge design allows the amplifier to produce high power efficiency while maintaining a lightweight and compact form. The Class D technology minimizes power loss, ensuring that more energy is directed towards sound output rather than heat generation. As a result, the M600 can deliver powerful sound with reduced distortion, providing an authentic audio experience.

Additionally, the Pioneer M600 boasts a high signal-to-noise ratio, a crucial characteristic for any high-fidelity amplifier. This specification ensures that the audio signal remains clear and free of unwanted noise, contributing to a more immersive listening experience. Coupled with a wide frequency response range, the M600 can reproduce both the deepest bass and the highest treble, making it suitable for a variety of music genres.

The M600 is designed with versatility in mind, featuring multiple inputs and outputs that accommodate various audio sources. Whether you are connecting a turntable, CD player, or streaming device, the M600 provides the flexibility needed to create a personalized audio setup. The unit also supports both analog and digital inputs, making it compatible with modern audio equipment.

In terms of construction, the M600 is built to last. The chassis is made from high-quality materials that not only enhance durability but also help reduce external vibrations that can affect sound quality. The design emphasizes heat dissipation, ensuring that the amplifier operates efficiently even during extended use.

Furthermore, the Pioneer M600 features customizable sound settings, allowing users to adjust parameters to suit their specific audio preferences. This includes equalization options that enable fine-tuning of frequency levels, resulting in a tailored audio experience that meets individual tastes.

Overall, the Pioneer M600 stands out as an exceptional amplifier that combines modern technology and user-friendly features. With its powerful performance, robust build quality, and adaptable connectivity, the M600 is a reliable choice for anyone looking to enhance their audio experience. Whether you are a casual listener or a serious audiophile, the Pioneer M600 offers the capabilities and performance that can elevate any home audio system.