Panasonic DMCLF1W 189, Select Single or Multi, When Single is selected, When Multi is selected

Wi-Fi/NFC

Operating the camera using a smartphone

Select [Via Network] or [Direct] to connect (→229)

(On your smartphone)

●●When connecting with [Via Network] Set Wi-Fi function to “ON”

Select a wireless access point and set

Start “Image App”∗ (→174)

●●When connecting with [Wi-Fi Direct] or [WPS Connection] in [Direct]

Start “Image App”∗ (→174)

●●When connecting with [Manual Connection] in [Direct]

Set Wi-Fi function to “ON”

Select the SSID that matches the one displayed on the screen of this unit, and then enter the password

Start “Image App”∗ (→174)

∗A window indicating that the smartphone is connecting to the camera is displayed. Press the “Back” button on Android devices. Select “Close” on iOS devices.

Select the device you wish to connect to

••When the connection is established, the screen is displayed. To change the send setting, press the [DISP.] button. (→238)

Select [SINGLE] or [MULTI]

••To change the setting or disconnect, press [Wi-Fi] button. (→171)

■■When [SINGLE] is selected

Select the picture

Select [Set]

■■When [MULTI] is selected

Select the picture (repeat)

••If selected again, the setting will be canceled. Select [OK]

••The number of pictures that can be sent by [MULTI] is limited.

••Confirmation screen is displayed. If you select [Yes], the operation is executed.

- 189 - VQT5A33