About connections
■■When connecting with [Manual Input]
On the screen of step 
of “If you are not sure about the WPS compatibility (connecting by [Manual Connection])”, select [Manual Input] (→231)
Enter the SSID of the wireless access point you are connecting to, then select [Set]
••For details on how to enter characters, refer to “Entering Text” (→65).
Select the network authentication type
••For information on network authentication, see the manual of the wireless access point.
Select the encryption type
••The type of settings that can be changed may vary depending on the details of network authentication settings.
Network authentication type | Encryption types that can be set |
[TKIP] / [AES] | |
[Common Key] | [WEP] |
[Open] | [No Encryption] / [WEP] |
(When an option other than [No Encryption] is selected)
Enter the encryption key
●●Check the wireless access points instruction manual and settings when a saving wireless access point.
●●If no connection can be established, the wireless access point’s radio waves may
be too weak. Refer to “Message displays” (→264) and “Q&A Troubleshooting” (→268) for details.
●●Transmission speed may decrease, or may not be usable depending on the environment it is used in.
- 232 - | VQT5A33 |
