
Application (Record)
Taking pictures with flash
●●Do not put your hands over the
Do not use the flash at close distances to other subjects (heat/light may damage subject).
●●The effect of
●●Flash settings may be changed when changing recording mode.
●●Scene Mode flash settings are restored to default when Scene Mode is changed. ●●Edges of picture may become slightly dark if using flash at short distances without
using zoom (close to max. W). This may be remedied by using a little zoom. ●●No pictures may be taken if these marks (e.g. ) are flashing (flash is charging).
●●If light from the flash on a subject is insufficient, neither the proper exposure nor White Balance is achieved.
●●The flash effect may not be sufficient in the following cases: ••When the shutter speed is fast
••When [Burst] is set to []
●●Flash charging may take time if battery is low, or if using flash repeatedly.
- 76 - | VQT5A33 |