Others
Message displays
[Memory card parameter error]
●●Card is not of SD standard.
●●When cards in capacities of 4 GB or more are used, only SDHC or SDXC Memory Cards are supported.
[Read Error] / [Write Error] [Please check the card]
●●Data read has failed.
→Check whether card has been inserted correctly (→19). ●●Data write has failed.
→Turn off the camera and remove the card. Reinsert the card and turn the camera on again. ●●Card may possibly be damaged.
●●Try with a different card.
[Cannot record due to incompatible format(NTSC/PAL) data on this card.]
●●Format the card after saving necessary data on a PC etc. (→64) → Insert a different card.
[Motion recording was cancelled due to the limitation of the writing speed of the card]
●●Motion picture recording may be automatically terminated with certain cards.
→If recording stops even when using a card of the recommended speed class (→20), the data writing speed has dropped. If this happens, we recommend backing up the data on the memory card and formatting it (→64).
[A folder cannot be created]
●●Folder numbers in use have reached 999.
→Save needed data on a computer or other device, and then use [Format] on the camera. (→64) Folder number is reset to 100 when performing [No.Reset] (→60).
[Picture is displayed for 16:9 TV] [Picture is displayed for 4:3 TV]
●●AV cable (optional) is connected to camera.
→ To remove message immediately → Press [MENU/SET]. → To change aspect ratio → Change [TV Aspect] (→62).
●●USB connection cable (supplied) is only connected to camera.
→ Message disappears when cable is also connected to another device.
[This battery cannot be used]
●●Use a genuine Panasonic battery.
●●Battery cannot be recognized as terminal is dirty. → Wipe any dirt away from the battery terminal.
[Recording failed.]
●●Recording may be impossible if the recording location for a 3D image is too dark/too bright, or if the subject lacks contrast.
- 265 - | VQT5A33 |
