Sending pictures to a PC
Still pictures and motion pictures recorded by the camera can be sent to a PC.
You can make a setting so that pictures in the camera can be sent to a PC automatically while the camera battery is charging. ([Smart Transfer] (→222))
■■Sending method, and pictures that can be sent
| JPEG | RAW | MP4 | AVCHD∗ | 3D | |
Sending a picture each time one is recorded | Yes | Yes | No | No | Yes | |
[Send Images While Recording] | ||||||
|
|
|
|
| ||
Sending selected pictures | Yes | Yes | Yes | Yes | Yes | |
[Send Images Stored in the Camera] | ||||||
|
|
|
|
|
∗Motion pictures recorded in [AVCHD] can be sent in file sizes of up to 4 GB. Files larger than 4 GB cannot be sent.
••Some images may not be played back or sent depending on the device.
••See the operating instructions of the destination device for more information about picture playback.
••For more details about picture sending methods. (→237)
Preparations:
••Turn the computer on.
••Prepare folders for receiving images on the PC before sending a picture to the PC. (→200)
••If the standard settings are changed for the workgroup on the connected PC, you must change settings in [PC Connection] on this unit. (→239)
See the part of the manual that applies to your objective.
Sending a picture each time one is recorded ([Send Images While Recording]) (→201)
Sending selected pictures ([Send Images Stored in the Camera]) (→202)
●●When sending images on a mobile network, high packet communication fees may be incurred depending on the details of your contract.
- 199 - | VQT5A33 |
