Panasonic DMCLF1W Burst function, 119, Press Use cursor button to select Burst and press MENU/SET

Application (Record)

Burst function

■■Recording mode: ∗1 ∗2

∗1 Cannot be set in the following modes: [Handheld Night Shot] [HDR] [Starry Sky] [3D Photo Mode]

∗2 Cannot be set in the following modes: [Toy Effect] [Miniature Effect] [Soft Focus] [Star Filter]

A burst of still pictures can be recorded while the shutter button is pressed fully.

Press

Use cursor button to select [Burst] and press [MENU/SET]

••To change the setting, press [DISP.] button and select a setting with .

Setting	Speed	Description	No. of
			pictures∗2
		••The burst speed is adjusted automatically in
		accordance with the movements of people, pets
∗1	Approx. 2 - 10	or other subjects. ([Intelligent Burst mode])
		••When a fast-moving subject is recorded, the	100
	pictures/sec.	frame rate becomes faster and the number
		of pictures that can be recorded in a series is
		restricted to about 10.
		••The subject is brought into focus as far as this
	Approx. 2	is allowed by the burst speed (excluding [MF]).
	pictures/sec.	However, when the burst function is operating
		during motion picture recording, the focus is
		fixed to the first picture.	100
		••The pictures are taken with the burst function
	Approx. 5	while the exposure and White Balance are
		being adjusted.
	pictures/sec.
		••The burst speed may be reduced under certain
		recording conditions.

∗1 [Intelligent Auto] Mode only

∗2 The number of burst pictures is limited by the picture-taking conditions and the type and/or status of the card used.

	(Continued on the next page)
- 119 -	VQT5A33