Others
Q&A Troubleshooting
About the Wi-Fi function (continued)
Pictures cannot be transmitted to the computer.
●●If a firewall is enabled by the OS or security software, this unit may be unable to connect to the computer.
Images cannot be transmitted to the WEB service.
→Confirm that the login information (login ID/user name/email address/password) is correct. ●●WEB service server or the network may be busy.
→Try again after a while.
→Check the site of the WEB service you are sending the image to.
It takes time to transmit an image to the WEB service. ●●Is the size of the image too large?
→ Transmit after dividing the motion picture with [Video Divide] (→161). → Reduce the image size at [Size] (→238), and then send.
●●It may take longer time to transmit when distance to the wireless access point is far. → Transmit closer to the wireless access point.
The image that was supposed to have uploaded to the WEB service is not there. ●●Upload may not complete when it is disconnected while transmitting the image.
●●It may take some time after uploading the image to be reflected in the WEB service depending on the status of the server.
→ Wait for a while and try again.
●●You can check the transmission status on the WEB service link settings by logging into “LUMIX CLUB”.
I would like to return the image in the WEB service to the camera.
●●The images in the WEB Service cannot be saved (downloaded) to this unit. Do not delete the uploaded images, and make a backup of them.
I cannot display or delete the images uploaded to the WEB service by this unit. ●●The images uploaded to the WEB service cannot be displayed or deleted by this unit.
→ Perform the task using a smartphone or a PC.
Your “LUMIX CLUB” login ID and password were deleted after sending the camera in to be repaired.
●●The settings stored in the camera may be deleted depending on the type of repair. → Always make a copy of important settings.
There is an image that could not be transmitted. ●●Is the size of the image too large?
→Divide the motion picture using [Video Divide] (→161).
→Reduce the image size at [Size] (→238), and then send. ●●Capacity or number of images in the WEB service is full.
→Login to “LUMIX CLUB”, and check the status of the destination on the WEB service link settings.
I have forgotten the password for the Wi-Fi.
→Execute the [Reset
→However, all the information you have set on the
- 274 - | VQT5A33 |
