Checking the Navigation Status
The navigation status, including the driving sta- tus of a vehicle, positioning status by satellite, learning status of the 3D sensor, and cable con- nection status can be checked.
Checking sensor learning status and driving status
1 Touch “Information” in the Main menu, then touch “3D Calibration”.
The 3D Calibration screen appears.
1
2
3
4
6 7 5
1.Distance
Driving distance is indicated.
2.Speed Pulse
Total number of speed pulses is indicated.
3.Learning Status
Current driving mode is indicated.
4.Degree of learning
Learning situations of Distance, Right Turn, Left Turn, and 3D detection are indicated by the length of bars.
5.Speed
Speed detected by the navigation system is indicated. (This indication may be different from the actual speed of your vehicle, so please do not use this instead of the speed- ometer of your vehicle.)
6.Front and back G/Rotational speed Accelerated velocity of your vehicle in front / back direction is indicated. Also, rota- tional speed when your vehicle turns to left or right is shown.
7.Inclination
Degree of slope of the street is indicated.
To clear values...
If you want to delete the learned results stored in “Distance”, “Speed Pulse” or “Learning Sta- tus”, touch the relevant result, then touch “Clear”.
❒The navigation system can automatically use two types of sensor memory based on the outer dimensions of the tires.
Checking the connections of leads and installation positions
Check that leads are properly connected between the main unit and the vehicle. Please also check whether they are connected in the correct posi- tions.
1 Touch “Information” in the Main menu, then touch “Connection Status”.
The Connection Status screen appears. Either “OK” or “NG” (or “No”) appears on the screen, and the connection status of each cable is shown.
1
2
3
4
5
6
7
1.Speed Pulse
The Speed Pulse value detected by the navi- gation system is shown. “0” is shown while the vehicle is stationary.
2.GPS Antenna
Indicates the connection status of the GPS antenna, the reception sensitivity, and from how many satellites the signal is received.
3.Installation Position
The Installation position of the main unit is shown.
4.Parking brake
When the parking brake is applied, “On” is displayed. When the parking brake is released, “Off” is displayed.
Chapter 3 Editing the Navigation Utilities
45