Appendix
Installing the Program
The program is installed to the Navigation Sys- tem using the application disc.
This is not necessary if your dealer already performed the installation.
When installing the program, you carry out the following operations. When all the setup proce- dures are completed, you can use the Navigation System.
1 Insert the disc while the vehicle is parked.
2 Select the language used for the Navi- gation System.
3 Setting the clock.
•You cannot go back to the previous (pre- upgrade) version of the application after the software upgrade is completed. Also, the map discs that were previously used cannot be used. Instead, use the CNDV- 40MT DVDs as your new map discs.
1 Park your vehicle in a safe place.
Leave the engine on, and make sure that the parking brake is on.
2 Insert the Pioneer DVD Map disc to the disc loading slot of the Navigation Sys- tem.
When upgrading, installation of the version upgrade program starts immediately.
•Once the installation of the program starts, do not stop the engine of your vehi- cle nor switch off the Navigation System until the installation is completed and the map of your surroundings or Audio screen appears.
3 Press the NAVI/AV button to change the navigation screen.
4 Touch “Yes/Oui”.
When you start the navigation unit for the first time, you will see a confirmation message asking if you wish to select another language. English is the default language of the Naviga- tion System. If desired, you can select another language as shown.
❒To keep English, touch “No/Non”. After this, proceed to Step 7.
❒When you want to select another lan- guage, touch “Yes/Oui”, and proceed to the next step.
5 Select the language from the list.
Touch the language you want to use.
Installation of the program, in the language you chose, begins.
When the installation is complete, the open- ing display appears.
Appendix
55