Getting started
Listening to other sources
You can connect auxiliary sources (TV, satellite receiver, etc.) to this unit for playback through the speaker system. See Connecting auxiliary audio components on page 31 for more on this.
•To connect a USB device to the USB terminal, see USB playback on page 22.
STANDBY | DVD/CD | TUNER |
|
/ON | (FM/AM) |
| |
|
|
| OPEN/ |
| USB | LINE | CLOSE |
|
|
AUDIO
1Make sure that the external source (TV, satellite receiver, etc.) is switched on.
2Press LINE to select the source. U.K. model only – Each press switches between LINE1 and LINE2.
3If necessary, start playback of the source.
Setting the sleep timer
The sleep timer switches off the system after about an hour so you can fall asleep without
worrying about it.1
•Press SLEEP repeatedly to select an option then press ENTER.
Choose between the following options:
•SLP ON – Switches off after about an hour
•SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP again to check how much time is left. Each line indicates approximately 12 minutes (remaining):
Dimming the display
You can dim the display if you find it too bright.
1 Press SETUP and use | to choose |
DIMMER then press ENTER. |
|
This is shown in the front panel display.
2 Use | to select LIGHT or DARK then |
press ENTER. |
|
02
English Deutsch Français Italiano Nederlands Español
S L P - - - - -
Note
1 The display dims when the sleep timer is set.
13
En