Pioneer AVH-P6450CD installation manual Screw Dashboard or Console Factory radio mounting bracket

Page 13

2.Fastening the unit to the factory radio mounting bracket. (Fig. 13) (Fig. 14)

Select a position where the screw holes of the bracket and the screw holes of this product become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of binding screws (4 × 3 mm), binding screws (5 × 6 mm) or flush surface screws (5 × 6 mm), depending on the shape of the screw holes in the bracket.

*1 Use binding screws (4 × 3 mm) only.

*1 *1

Fig. 13

Screw

Dashboard or Console

Factory radio mounting bracket

Fig. 14

ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS

12

Image 13
Contents English Español Português B Installation ManualContents Connecting the UnitsEnglish Español Deutsch Français Italiano Nederlands Refer to Fuse resistor Violet/white Yellow/black Connecting the power cordFrançais Italiano Nederlands English Español DeutschConnecting method English Español Connecting the system aFrançais Italiano NederlandsConnecting the system B English Video Input / Output ConnectionEspañol Deutsch FrançaisDIN Front-mount DIN Front/Rear-mountHolder Deutsch Français Italiano NederlandsDIN Rear-mount When the installation space is not very deepScrew Dashboard or Console Factory radio mounting bracket Pioneer Corporation