•PIP G on V: Enter PIP mode and display graphics in video.
•PIP V on G: Enter PIP mode and display video in graphics.
•PBP G by V: Enter PBP mode and display graphics by video.
•PBP V by G: Enter PBP mode and display video by graphics.
V(video)= TV, AV1,
Using the Sleep Timer
1.Press the 
(Sleep timer) button on your remote control to set the automatic sleep timer.
2.Press the button again to increase the time interval. Time is set in increments of 30 minutes, from 0 to 180 minutes.
Adjusting Backlight
To adjust the intensity of your display's backlight, press the 
(Backlight) button on your remote control to select "Dark", Normal" or "Bright".
When viewing the display in dimly lit rooms it is recommended to set the backlight to "Dark". Setting the backlight to "Dark" will reduce the image brightness and make the dark areas of the image darker thus maintaining a high contrast image in a dark environment.
Display Information
Press the 
(Information) button on your remote control to display the signal information, including input video signal source, Video format, TV sound and current selected channel.
Using the Teletext Function
Press the 
(Teletext) button on the remote control to enable the Teletext function. To disable the function, press the button again.
When Teletext is displayed on the screen, you can:
•Press the 
(Teletext display) button to cycle Teletext display types among Teletext only - mixed display - TV video image only.
•Press the 
(Teletext index) button to go to Teletext index page.
•Press the 
(Teletext information) button to display some concealed Teletext information.
•Press the 
(Enter Teletext subpage) button to enter the subpage of a Teletext menu.
•Press the 
, 
, 
or 
buttons to jump to different pages.
• Press the |
| / |
| buttons to go to the previous or next page. |
|
|
English
Using the Remote Control | 17 |
Downloaded From