BenQ DV3750 Full Screen Enlarge, Video signal. When, Ratio e.g. DVD, Format Display, Occur

English

					• Full Screen - Enlarge the
					standard 4:3 video signal (e.g.
					TV signal) to 16:9 full screen
					video signal. When the
					original input video source is
					16:9 in ratio (e.g. DVD
					signal), no change will occur.
					• 4:3 Format - Display the
					standard 4:3 video signal (e.g.
					TV signal) in the center of
					the screen at the ratio of 4:3.
					The screen does not change,
					but black blocks appears in
					the left and right sides of the
					screen. When the input video
					source is 16:9 in ratio,
					deformation will occur on
		Use the	and	buttons on	the screen.
					• Letterbox -Fill the entire 4:3
Aspect	Adjust image aspect	the remote control or the
					screen with a 4:3 video signal.
		Volume	and Volume
Ratio	ratio.				The redundant part on the
		buttons on the display to
					upper and bottom of the
		change selection.
					image will be removed and
					the image will extend
					vertically and horizontally to
					fill the full screen. When the
					input video source is 16:9 in
					ratio (e.g. DVD signal), no
					change will occur.
					• Anamorphic - Fill the entire
					screen with a 4:3 video signal.
					Some deformations may be
					identified on the edge of the
					image. When the input video
					source is 16:9 in ratio (e.g.
					DVD signal), no change will
					occur.
					• Real - Display the actual size
					of the video source without
					zooming.
	Set the display to auto-	Use the	and	buttons on
		the remote control or the
Auto	matically adjust screen				• Yes
		Volume	and Volume
Format	aspect ratio when the				• No
		buttons on the display to
	SCART input is used.
		change selection.
		Use the	and	buttons on
Video	Select video signal input	the remote control or the			TV, AV1, AV1 RGB, AV2, AV2-
	source for PIP/PBP	Volume	and Volume
Input					S, AV3, AV3-S, AV4, AV4-S
	function.	buttons on the display to
		change selection.
		Use the	and	buttons on	• PC
Graph-	Select graphics signal	the remote control or the
					• Component 1
ics	input source for PIP/	Volume	and Volume
					• Component 2
Input	PBP function.	buttons on the display to
					• DVI
		change selection.
Reset All	Restore all settings to	Press the OK button on the
		remote control or the INPUT
Settings	default values.
		button on the display to reset.
24 On-Screen Display (OSD) Menu

Downloaded From TV-Manual.com Manuals