1311How to install your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not
1.Unpack the monitor and place the monitor on the desk as illustrated before you cut the retaining strap.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.
2.Adjust the viewing angle.
Lift the screen upward and then pull the screen forward until a clicking sound is heard.
For more information about the adjustment of the view- ing angle, refer to "Viewing Angle Adjustment".
You should position the monitor and angle the screen
to minimize unwanted reflections from other light sources.
3. Connect the video cable.
Connect the plug of the
Tighten all finger screws to prevent the plugs from acci- dently falling out during use.
How to install your monitor hardware | 6 |