4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled ’POWER IN’ on the rear of the monitor. Do not connect the other end to a power point just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power point and turn it on.
Turn on the monitor by pressing the power button on the front of the monitor.
Turn on the computer too, and follow the instructions in Section 4: Getting the most from your BenQ monitor to install the monitor software.
The power point and plug shown are indicative only, and may differ from that used in your region.
7How to install your monitor hardware