IPod function operation, Scan radio | Boss Audio Systems bv9963i

INSTRUCTIONS

iPod function operation

Connect to iPod first, touch [i-Pod] icon on main interface to access iPod interface, as shown in below diagram.

Play/Pause Fast forward play/Fast backward play

Volume adjustment knob

INSTRUCTIONS

Radio Function Operation

Enter/exit

Touch [ RADIO ] icon in the main interface to enter into the radio interface.

Touch icon to return to main interface, and then touch other function icons so as to exit radio mode.

Band selection

Click [BND] icon so as to switch among FM1,FM2, FM3, AM1, AM2 bands.

StopPrevious Song/next Song

External input operation

Back to the

main interface

Search/Save radio stations

Short press [Scan] icon to browse the stored radio stations.

FM band can save 18 radio stations (Six stations for FM1/FM2/FM3), AM band can save 12 radio stations (Six stations for AM1/AM2).

Connect the video input plug with external video input jack, and connect the audio input plug with external audio input jack.

Touch [Input] icon on main interface to access external input interface.

Audio You can adjust thevolume, bass, pitch for input audio.

You can adjust the speaker volume by adjusting the front and back,left and right column.

Video You can adjust the brightness, contrast, saturation and hue for input video. You can also choose the video standard mode.

NO VIDEO SIGNAL

Other functions

Rearview function

In any running state, the video signal can switch to reverse video state when reversing the car, and the system shall return to its initial running state after reversing the car.

Warning

Do not rely on CCD system completely, please make sure you use your direct eyesight while driving.Back rearview system only assists in driving. As the distance range of rearview system is limited, completely relying on the rearview system during driving may cause accidents.

Reverse field simulation

Rearview backup image