Installing the monitor

•Always use great care when attaching anything to a vehicle! Visually inspect all sides of any potential screw location to ensure no damage will occur.

WARNING!

NEVER install this monitor where it is visible from the driver’s seat, or where it could injure any vehicle occupant in case of an accident. Ensure that your installation does not create risk of head-strike injury, and that the monitor will remain securely mounted in the case of an accident or sudden maneu- ver.

These TFT LCD monitors are designed for custom installation. While a basic flush-mount bezel is supplied, you may need parts that are not included (depending on your installation). Clarion also offers optional mounting kits:

•The ZMT003 is a flexible gooseneck mount.

•The PQE023 positions the monitor on the back of a vehicle headrest.

Note:

The Clarion HRM100 and HRM150 headrest mounting kits are not compatible with this monitor.

Flush mounting in the headrest

You may use the included trim bezel to flush-mount the monitor.

1.Ensure that you will have sufficient clearance for the monitor and its rear-located wiring harness.

2.Cut the opening.

3.Route the DIN-connector end of the wiring harness into the opening from the rear out the front.

14VMA5894 and VMA7194