Clarion VMA7194, VMA5894 owner manual Adjusting the picture

Page 9

WIDE stretches the image horizontally to fit the screen (aspect ratio of 16:9).

4:3

 

16:9

 

 

 

5. Adjust the volume on your headphones.

Notes:

When using a DVD player as the source, make sure that the unit’s output mode is set to “Wide” or “16:9.” This ensures that the DVD player will generate a video signal, which can take advantage of the monitor’s aspect ratio.

When using a source that generates a “normal”, 4:3 image signal, such as a videogame or videocassette player, the WIDE button stretches the image to fit the screen. Some minor image distortion may be visible.

Adjusting the picture

If the temperature is normal and the picture still doesn’t look right, you may adjust the tint, color, brightness, and contrast.

1.Press PICTURE to display the adjustment menus. The monitor displays the adjustment menus.

2.Press PICTURE again until you reach the option you wish to adjust.

The monitor displays the adjustment bar:

TINT adjusts the overall color of the monitor. COLOR adjust the way each color displays. BRIGHT adjusts the monitor’s brightness.

CONTRAST adjusts the differences between light and dark areas.

3.Press the plus (+) end of the picture controls button to increase the adjustment.

Press the minus (-) end of the picture controls button to decrease the adjustment.

VMA5894 and VMA7194

9

Image 9
Contents VMA5894 and VMA7194 FCC Approval About InstallationContents Troubleshooting Specification Installation and WiringFeatures PrecautionsIntroduction Please note Using the MonitorFront panel controls Transmit infrared signals to the headphonesPlaying a video or game Wireless headphonesAdjusting the picture Changing the video output mode Switching between video sourcesTurning the unit off and on Playing two videos or games at onceReturning adjustments to the factory settings Disabling automatic power onUsing a remote control Connecting a video sourceCleaning the cabinet Care and MaintenanceCleaning the LCD panel Servicing the monitorInstallation and Wiring What is included in the boxBefore Starting Flush mounting in the headrest Installing the monitorMounting tabs Mounting screw holes Wire harness opening Wiring the monitor Custom Mounting using the threaded insertRemoving the monitor from the bezel Monitor connections IR connector polarityConnections diagram System does not work TroubleshootingNo picture Screen is darkVMA5894 General Specifications SpecificationVMA5894 Specifications VMA7194 General SpecificationsVMA5894 and VMA7194 22 VMA5894 and VMA7194 Limited Warranty Information
Related manuals
Manual 8 pages 33.73 Kb Manual 24 pages 15.16 Kb