4.Insert the trim bezel and route the wiring harness through the opening in the rear.
5.Firmly attach the bezel to the mounting surface and/or to the interior of the mounting surface.
Mounting tabs
Mounting screw holes
Wire harness opening
6.Connect the wiring harness to the monitor, and tuck the excess wiring harness length carefully out of the way behind the bezel.
7. Gently insert the monitor into the bezel.
Press only on the edges of the monitor, not on the screen. You should hear a few soft clicks as the monitor locks into place.
CAUTION!
NEVER press on the surface of the screen! Gently press on the edges of the monitor case. If you find that you can- not insert the monitor without excessive force, you may need to check your wire harness position for interference with the insertion process. You may also need make the opening slightly larger.
VMA5894 and VMA7194 | 15 |