When an optional CD changer is connected through the CeNET cable, this unit controls all CD changer functions. This unit can control a total of 2 changers (MD and/or CD).
Press the FUNC button 1 and select the CD changer mode to start play. If 2 CD changers are connected, press the FUNC button 1 to select the CD changer for play.
∗If “NO MAG” appears in the display, insert the magazine into the CD changer. “LOADING” ap- pears in the display while the player loads (checks) the magazine.
∗If “NO DISC” appears in the display, eject the magazine and insert discs into each slot. Then, reinsert the magazine back into the CD changer.
1.Display the CD-text title (disc or track).
2.Press and hold the BAND button % for 1 sec- ond or longer. The titles scroll.
When the panel is open:
1.Display the CD-text title (disc & track).
2.Press and hold the TITLE button ( for 1 sec- ond or longer to scroll the disc title.
3.To scroll the track title, press for 1 second or longer the TITLE button ( within 30 seconds after scrolling the disc title.
Notes:
•If the disc title is shorter than 16 characters, the track titles begin to scroll immediately.
•If the track title is shorter than 16 characters, the track titles does not scroll.
●Fast-forward
Press and hold the right side of the SEARCH button 2 for 1 second or longer.
●Fast-backward
Press and hold the left side of the SEARCH but- ton 2 for 1 second or longer.
Top function
The top function plays from the first track (track No. 1) of the disc.
●When playing a disc 1 to 6
Press the DIRECT buttons # (1 to 6) with the same number as the CD playing.
● When playing a disc 7 to 12 (only when a 12 |
The repeat play continuously plays the current track. This function continues automatically until it is cancelled or the mode is changed.
1.Press the RPT button 7, to make repeat play starts. “RPT” lights in the display.
2.To cancel repeat play, press the RPT button
7 again. “RPT” goes off from the display and the unit returns to normal play.
Disc repeat play
After all tracks in the current disc have been played, the disc repeat play automatically replays the current disc over from the first track. This func- tion continues automatically until it is cancelled or the mode is changed.
CAUTION
CD-ROM discs cannot be played in the CD changer.
Pausing play
1.Press the PLAY/PAUSE button 3 to pause play. “PAUSE” appears in the display.
2.To resume play, press the PLAY/PAUSE but- ton 3 again.
Displaying CD titles
This unit can display title data for CD-text CDs and user titles input with this unit.
Each time you press and hold the DISP button
@for 1 second or longer, the title display changes in the following order.
When the panel is closed:
User title (disc) ➜ CD-text title (disc) ➜ CD-text
title (track) ➜ User title (disc)...
When the panel is open:
User title (disc) ➜ CD-text title (disc & track) ➜
User title (disc)...
Note:
•If the CD playing is not a CD-text CD or no user title has been input, “----------” appears in the dis- play.
●Scrolling a CD-text title
When a CD-text title is longer than 16 charac- ters (8 characters when the panel is closed), you can scroll the display as follows.
Selecting a CD
Each of the DIRECT buttons # corresponds to a disc loaded into the magazine.
●Selecting a disc from 1 to 6
Press the corresponding DIRECT buttons (1 to 6) # to select the desired disc.
●Selecting a disc from 7 to 12 (only when a 12 disc CD changer is used.)
Press the corresponding DIRECT buttons (7 to
12)# for 1 second or more, then select the desired disc.
Selecting a track
●Track-up
1.Press the right side of the SEARCH button 2to move ahead to the beginning of the next track.
2.Each time you press the right side of the SEARCH button 2, the track advances ahead to the beginning of the next track.
●Track-down
1.Press the left side of the SEARCH button 2 to move back to the beginning of the current track.
2.Press the left side of the SEARCH button 2 twice to move to the beginning of the previ- ous track.
disc CD changer is used.) |
Press the DIRECT buttons # (7 to 12) with the same number as the CD playing for 1 second or longer.
Scan play
The scan play locates and plays the first 10 sec- onds of each track on a disc automatically. This function continues on the disc until it is cancelled or the mode is changed.
∗The scan play is useful when you want to select a desired track.
1.Press the SCN button 5 to start scan play.
2.Press the SCN button 5 again to cancel the scan play. Current track continues to play.
Disc scan play
The disc scan play locates and plays the first 10 seconds of the first track on each disc in the cur- rently selected CD changer. This function con- tinues automatically until it is cancelled or the mode is changed.
∗The disc scan play is useful when you want to se- lect a desired CD.
1.Press the SCN button 5 for 1 second or longer to start disc scan play.
2.Press the SCN button 5 again to cancel disc scan play. Normal disc play continues on the current track.
1.When you press the RPT button 7 for 1 sec- ond or longer, disc repeat play starts. “D-RPT” lights in the display.
2.To cancel disc repeat play, press the RPT button 7 again. “D-RPT” goes off from the display and the unit returns to normal play from the track being played.
Random play
The random play selects and plays individual tracks on the disc in no particular order. This func- tion continues automatically until it is cancelled or the mode is changed.
1.When you press the RDM button 8, random play starts. “RDM” lights in the display.
2.To cancel random play, press the RDM but- ton 8 again. “RDM” goes off from the dis- play and the unit returns to normal play.
Disc random play
The disc random play selects and plays individual tracks or discs automatically in no particular or- der. This function continues automatically until it is cancelled or the mode is changed.
1.When you press the RDM button 8for 1 sec- ond or longer, disc random play starts. “D- RDM” lights in the display.
2.To cancel disc random play, press the RDM button 8 again. “D-RDM” goes off from the display and the unit returns to normal play from the track being played.
