DSP control function
If the DSP (DPH7500z/7700z), sold separately, is connected to this unit using the CeNET cable, all the functions of the DSP can be controlled.
∗When the DSP is connected, an external ampli- fier is required.
∗DSP control can all be operated only when the panel is open.
DSP functions
There are 2 modes available in DPH7500z/7700z, standard mode and professional mode. Choose one of them and adjust the sound field and the sound quality.
●Functions common to each mode:
Such as auto loudness, subwoofer etc.
●Standard mode:
Adjustment using the graphic equalizer function and the DSP function.
●Professional mode:
Adjustment using the space equalizer function and the parametric equalizer function.
Operations common to each mode
Output adjustment of auto loudness, subwoofer and playback band
1.Press the ADJ button * to switch to the ad- justment selection display.
2.Operate the JOYSTICK ¡ upward or down- ward to select “SOUND” and press the ENT at the center of the JOYSTICK ¡ to change into the Sound adjustment display. In the Sound adjustment display “A.LD LEVEL”, “W.OUT”, “W.LPF”, “HPF”, “T.TONE” are listed.
Operate the JOYSTICK ¡ rightward or left- ward to select an item to be adjusted.
3.To make an adjustment on:
●Auto loudness adjustment
Operate the JOYSTICK ¡ upward or down- ward to adjust an auto loudness level (0 to 10).
●Woofer out adjustment
4.After adjustment (setting), operate the JOY- STICK ¡ rightward or leftward to move the cursor to “MENU” and press the ENT at the center of the JOYSTICK ¡ to return to the adjustment selection display.
5.Press the ADJ button * again to return to the STANDARD display.
Selecting the standard mode or the professional mode
∗The factory default setting is “STD”.
1.Press the ADJ button * to switch to the ad- justment selection display.
2.Operate the JOYSTICK ¡ upward or down- ward to select “DSF/EQ”. “STD” and “PRO” items are displayed in the menu bar.
3.Operate the JOYSTICK ¡ rightward or left- ward to select a desired mode and press the ENT at the center of the JOYSTICK ¡ to set the mode thus selected.
4.After setting, press the ADJ button * again to return to the STANDARD display.
Standard mode/Setting the lis- tening position
Selection of listening position
1.Press the A-M button & to show the AUDIO- MODE display.
2.Operate the JOYSTICK ¡ upward or down- ward to select “POSITION”. “SELECT" and “DETAIL” are displayed in the menu bar.
3.Operate the JOYSTICK ¡ rightward or left- ward to select “SELECT”, and press the ENT at the center of the JOYSTICK ¡ to show Position selecting display.
4.Operate the JOYSTICK ¡ upward or down- ward and press the ENT at the center of the JOYSTICK ¡ to select a desired position.
5.Operate the JOYSTICK ¡ rightward or left- ward to move the cursor to “MENU”, and press the ENT at the center of the JOYSTICK ¡ to return to the AUDIO-MODE display.
∗When the standard mode is selected, adjustment for the professional mode cannot be made. On the contrary, when the professional mode is se- lected, adjustment for the standard mode cannot be made.
∗For details on functions of each mode, refer to the owner’s manual supplied with the DPH7500z/ 7700z.
∗Hereafter the graphic equalizer is referred to as a G.EQ, the space equalizer referred to as VSE and the parametric equalizer referred to as P.EQ.
Select woofer output out of “STEREO”, “MONO”, or “OFF”.
Operate the JOYSTICK ¡ upward or down- ward to select a desired item, and then press the ENT at the center of the JOYSTICK ¡ to set it.
●Woofer LPF adjustment
Select woofer LPF slope out of “50Hz”, “80Hz”, “120Hz”.
Operate the JOYSTICK ¡ upward or down- ward to select a desired item, and then press the ENT at the center of the JOYSTICK ¡ to set it.
●HPF adjustment
Woofer level adjustment
You can adjust an output sound level of subwoofer.
1. | Press the A-M button & to show the AUDIO- |
| MODE display. |
2. | Operate the JOYSTICK ¡ upward or down- |
| ward to select “W-VOL” and press the ENT |
| at the center of the JOYSTICK ¡ to show |
| the woofer level adjusting display. |
3. | Operate the JOYSTICK ¡ upward or down- |
| ward to adjust the level (0 to 14). |
4. | After adjustment, operate the JOYSTICK ¡ |
| rightward or leftward to select “MENU” and |
Detail adjustment of listening position
1. | Press the A-M button & to show the AUDIO- |
| MODE display. |
2. | Operate the JOYSTICK ¡ upward or down- |
| ward to select “POSITION”. “SELECT" and |
| “DETAIL” are displayed in the menu bar. |
3. | Operate the JOYSTICK ¡ rightward or left- |
| ward to select “DETAIL”, and press the ENT |
| at the center of the JOYSTICK ¡ to show |
| Position Detail adjusting display. |
4. | Operate the JOYSTICK ¡ rightward or left- |
| ward to select “BALANCE” or “FADER”. |
5. | Operate the JOYSTICK ¡ upward or down- |
Select HPF slope out of “50Hz”, “80Hz”, “120Hz”, or “OFF”.
Operate the JOYSTICK ¡ upward or down- ward to select a desired item, and then press the ENT at the center of the JOYSTICK ¡ to set it.
●Test Tone Output
Select Test Tone Output
Operate the JOYSTICK ¡ upward or down- ward to select a desired item, and then press the ENT at the center of the JOYSTICK ¡ to produce a test tone.
press the ENT at the center of the JOYSTICK |
¡¡return to the AUDIO-MODE display. |
ward to make an adjustment. |
6. Operate the JOYSTICK ¡ rightward or left- |
ward to move the cursor to “MENU”, and press |
the ENT at the center of the JOYSTICK ¡ to |
return to the AUDIO-MODE display. |
