Clarion VRX610 owner manual Other Functions, Clock Adjustment, Entering titles, Title list play

Other Functions

Other Functions

Always turning on the button illumination on the operation panel

Note:

•The following operation is enabled when the panel is open.

The button illumination on the operation panel when the display is turned upward, can be switched between “ON” and “OFF”.

●“ON”: Button illumination on the operation panel turns on for 5 seconds;

4.Operate the JOYSTICK ¡ upward or down- ward, rightward or leftward and move the cur- sor to the character to be entered. Press the ENT at the center of the JOYSTICK ¡.

∗When the cursor is at the lower/upper limit of the display, operate the JOYSTICK ¡ upward or downward, the character string of the follow- ing line appears.

“-->”	:	Space
“<--”	:	Backspace
“--I--” :		Centering

Clock Adjustment

1.	Press the ADJ button * to display the ad-
	justment selection display.
2.	Move the JOYSTICK ¡ up or down to select
	CLOCK, then press ENT at the center of the
	JOYSTICK ¡to display the clock adjustment
	display.
3.	Move the JOYSTICK ¡ left or right to select
	HR or MIN, then move the JOYSTICK ¡ up
	or down to adjust the time.

●“OFF” : Button illumination is always on when the power is turned on;

1.When the panel is open, press the ADJ button £ to show the adjustment selection display.

2.Operate the JOYSTICK ¡ upward or down- ward and select “AUTO ILL” to show “ON” and “OFF” in the menu bar.

3.Operate the JOYSTICK ¡ rightward or left- ward to select either position to be set and press the ENT at the center of the JOYSTICK

¡ for setting.

4.Press the ADJ button * to return to the pre- vious mode.

∗To set “ON” again, switch “OFF” to “ON” manually.

Entering titles

Titles up to 10 characters long can be stored in memory and displayed. The numbers of titles that can be entered for each mode are as follows.

Mode	Number of titles
Radio mode	30 titles
TV mode	15 titles
CD changer mode	Number of titles
CDC655z connected	60 titles
CDC655Tz connected	100 titles
CDC1255z connected	50 titles

∗You cannot enter titles with the unit in Seek, Pre- set Scan, Auto store (TUNER, TV), Scan, Repeat or Random (CD changer, MD changer) mode. Can- cel each of those operations before entering titles.

1.Press the FUNC button 1 to select the mode you want to enter a title (CD changer or TV).

2.Select and play a CD in the CD changer or tune in to a TV station for which you want to enter the title.

3.If you press and hold the TITLE button ( for 1 second or longer, the display switches to the title input mode display.

5.Repeat the step 4 to enter the complete title.

6.Press and hold the ENT at the center of the JOYSTICK ¡ for 2 seconds or longer to store the title into memory and cancel title input mode.

Title list play

You can display a list of titles, then select the disc or broadcast station to listen to from that list.

∗You can not display a title list with the unit in Seek, Preset Scan, Auto store (Tuner or TV), Scan, Re- peat or Random (CD changer or MD changer) mode. Cancel those operation modes before to display a title list.

1.With the unit in radio, CD/MD changer, TV, press the TITLE button (. A title list is dis- played. The following functions can be car- ried out in a title list display.

●TUNER: A title of a channel stored in the presets 1 to 6 or a channel number is dis- played.

●CD/MD changer: DISC titles for discs 1 to

6 are displayed (By changing over a display page in case of 12-CD changer, disc 7 to 12 can be displayed). When there is not any disc in a changer, ”---------” is displayed.

●TV: A title of a channel stored in the pre- sets 1 to 6 or a channel number is displayed.

2.Operate the JOYSTICK ¡ upward or down- ward to select one of the items 1 to 6. Press ENT at the center of the JOYSTICK ¡ to re- produce the selected broadcast station or disc.

∗In case of 12-CD changer, move the cursor to disc 6 and then operate the JOYSTICK ¡ downward to change over to a list display of discs 7 to 12.

3.Press the TITLE button ( again to return to the STANDARD display.

∗ The time is displayed in 12-hour format.

4. Pressing ENT at the center of the JOYSTICK

¡when the cursor is above HR or MIN saves

the adjusted value in memory and simulta-

neously returns the display to the previous

display (adjustment selection display).

To cancel clock adjustment before completion, use the JOYSTICK ¡ to move the cursor to MENU, then press ENT at the center of the JOYSTICK ¡.

Triggered audio mute for cellular telepones

This unit requires special wiring to mute the au- dio signal automatically when a cellular telephone rings in the car.

∗This function is not compatible wiht all cellular telepones Contact your local authorized Clarion dealer for information on proper installation and compatibility.

30 VRX610 VRX610 31