Directed Electronics HVM702A installation manual Remote Control

Page 7

10.Volume control—if the OSD is active, these allow scrolling through menu options

11.Menu On/Off—press the menu button to go back to the previous selection

12.Scan—used in conjunction with a TV tuner

13.A/M—used in conjunction with a TV tuner

14.TX—not used

15.DIM—dims the LCD screen

16.Up/down button for menu

17.MODE—changes the viewing aspect ratio (Full, 4:3, or Wide)

18.SOURCE—used in conjunction with a TV tuner

19.Remote IR LED—IR LED used to transmit commands to the monitor

Remote Control

1.(S/T)—use these buttons to adjust the selected setting on the MENU screen.

2.SOURCE—press this button to select the video source (AV1/AV2).

3.MENU—press this button to display the MENU screen. Continue to press this button additional times to scroll through the MENU selections.

4.POWER—press this button to turn power on or off to the unit.

© 2004 Directed Electronics, Inc.

7

Image 7
Contents Widescreen TFT LCD Color Monitor NON-TRANSFERABLE Limited Consumer Warranty Table of Contents Important Notes Introduction FeaturesSystem Description What is IncludedRemote Control Operation Battery ReplacementMenu Adjustments Bass on OFF Mute on OFF Headrest Housing/Bezel Installation Headrest Installation Typical Wiring Diagram Multiple A/V Input Selector Connecting a Monitor to Multiple SourcesVS102 Problem Solution TroubleshootingPAL/NTSC SpecificationsDirected Electronics, Inc Directed Electronics, Inc Company behind this system is Directed Electronics, Inc