Directed Electronics HVM702A installation manual Menu Adjustments

Page 9

Press the SEL button on the remote control to the mute the audio, press again to restore audio.

NOTE: If the MENU button on the remote has been pressed prior to pressing the SEL button, the SEL button now selects a menu item to be adjusted.

MENU (ADJUSTMENTS)

1. Press the MENU button on the remote to display the following four groups:

VIDEO

AUDIO

MODE

DISP

 

 

 

 

Bright

Volume

Full

PAL/NT

Color

Bass

4:3

UP/DN

 

 

 

 

Tint

Mute

Wide

LET/RIT

 

 

 

 

Dimmer

H/P

 

 

Reset

 

 

 

 

 

 

 

2.Use the S/T buttons on the remote to highlight the VIDEO, AUDIO, MODE, or DISP groups.

3.Press the SEL button to select the desired group. Use the S/T buttons to select the desired setting to change.

4.Use the W/X buttons to change the setting.

4.If no entry or action is taken within approximately 8-seconds the Menu will disappear and any changes are saved. Pressing the MENU button will also exit the adjustments screen.

VIDEO

BRIGHT(ness): 0–15

COLOR: 0–15

TINT: 0–15

DIMMER: ON–OFF (In the ON position the LCD screen is dimmed, which offers better veiwing at night or in dimly lighted envirorments.)

RESET: YES–NO (This resets the unit back to the factory default settings for the above adjustments.)

© 2004 Directed Electronics, Inc.

9

Image 9
Contents Widescreen TFT LCD Color Monitor NON-TRANSFERABLE Limited Consumer Warranty Table of Contents Important Notes Introduction FeaturesSystem Description What is IncludedRemote Control Operation Battery ReplacementMenu Adjustments Bass on OFF Mute on OFF Headrest Housing/Bezel Installation Headrest Installation Typical Wiring Diagram Multiple A/V Input Selector Connecting a Monitor to Multiple SourcesVS102 Problem Solution TroubleshootingPAL/NTSC SpecificationsDirected Electronics, Inc Directed Electronics, Inc Company behind this system is Directed Electronics, Inc