Using a rear view camera | |
• | To use a rear view camera, a REVERSE GEAR |
| SIGNAL lead connection is required. (Page 51) |
0 | Activating the rear view camera |
1 | Display the <Input> setting screen. |
| On the <HOME> screen: |
0 Displaying the picture from the rear view camera
The rear view screen is displayed when you shift the gear to the reverse (R) position.
To display the picture from the rear view camera manually On the <HOME> screen:
| For | |
2 | ||
caution message, touch the screen. | ||
|
To deactivate: Select [Off] for <Camera Input>.
• | When displaying the picture from the rear view |
| camera manually, you can change the setting |
| of the picture using [Zoom]/[Aspect]/[Adjust]. |
| (Page 39) |
To exit the rear view screen |
| |
|
28