JVC KWV20BT No Signal, MISWIRINGCheck wiring connection then reset, Unit Reset unit, ParkingBrake

	Error messagf;! li~t
If an error occurs while using the unit, a message
appears. Take appropriate action according to the
following message/remedy/cause list.
11	NO Signal":
•	Start the playback on the external component
	connected to the AV-IN1 terminal.
•	Check the cords and connections.
•	Signal input is too weak.
''MISWIRINGCheck wiring connection then reset
unit"/		11	WARNING Check wiring connection then
reset unit":
•	A speaker cord has shorted or it has come in to
	contact with the car chassis. Wire or insulate the
	speaker cord as appropriate, then reset the unit.
	(Pages 3 and				51)
''ParkingBrake":
•	No playback picture is shown when the parking
	brake is not engaged.
11	Eject Error"/			11	Loading Error":
•	Eject the disc forcibly. (Page 3)
11	Restricted Device":
•	Check whether the connected iPod/iPhone is
	compatible with this unit. (Page 56)

11	USB Device Error":
•	The USB power voltage is abnormal.
•	Turn off and turn on the unit.
•	Connect another USB device.
~~connection Error":
•	The device is registered but the connection has
	failed. Connect the registered device. (Page 32)
11	Piease Wait...":
•	The unit is preparing to use the Bluetooth
	function. If the message does not disappear, turn
	off and turn on the unit, then connect the device
	again (or reset the unit).
11	NO Voice Device":
•	The connected mobile phone does not have a
	voice recognition system.
11	NO Data":
•	No phone book data is contained in the connected
	Bluetooth phone.
11	lnitialize Error":
•	The unit has failed to initialize the Bluetooth
	module. Try the operation again.
11	Dial Error":
•	Dialing has failed. Try the operation again.
11	Hung Up Error":
•	The call has not ended yet. Park your car, and use
	the connected mobile phone to end the call.
11	Pick Up Error":
•	The unit has failed to receive a call.

11	Pandora upgrade required":
•	The Pandora application on your iPod touch/
	iPhone/Android is not the latest version. Update
	the application.
11	Check App":
•	The Pandora application on your iPod touch/
	iPhone/Android is not started up.
•	The Pandora application is not installed in the
	connected device.
•	Error occurs on the Pandora application.
•	You have not been signed in the Pandora.
11	SXM No Signal":
•	Make sure the SiriusXM radio antenna is mounted
	outside the vehicle. Move vehicle to an area with a
	clear view of the sky.
11	SXM Check Antenna":
•	Check the SiriusXM radio antenna connection, and
	make sure the antenna is firmly attached to the
	tuner.
•	Check whether the SiriusXM radio antenna cable is
	bent or broken. If it is damaged, replace the whole
	antenna unit.

58