Venturer PVS7980 owner manual Listening to a Stereo Receiver or Amplifier on the Main Unit

CONNECTIONS

C. Listening to a Stereo Receiver or Amplifier on the Main Unit

The main unit can play two channels Dolby Digital.

Listening on External Audio Equipment

1.Connect the main unit to the left/right Audio In jacks on the other equipment using a standard

Audio cable (not included).

2.Turn on the main unit.

3.Turn on your audio equipment and follow the instructions provided with it to select the AUDIO IN function.

Note:

• Make sure to use the correct Audio cable. Connecting the plugs incorrectly may cause a weak signal.

• If you have a stereo VCR, make sure you set it to stereo mode.

• Due to copyright protection, DVD movies cannot be copied. If you copy a DVD movie onto a videotape, the resulting copy will be unclear, with poor sound quality. This is NOT caused by a defective DVD system.

D. Playing a Game System/Video Equipment on the Monitor

You can connect game systems or other video equipment for playback through the monitor only. You cannot connect these systems to the main unit.

Watching Video Equipment

1.Connect the other equipment to the monitor using a standard AV Cable (not included).

2.Turn on the monitor.

3.Turn on the video equipment and follow the instructions provided with it to playback.

Note:

•Make sure to use the correct Audio/Video cable. Connecting the plugs incorrectly may cause a weak signal.

•If you have a mono VCR, the volume level from the speakers will be low.

E - 10