Venturer PVS7980 owner manual CD/DVD Operation, Playing a Disc, Playing a Picture File Disc

CD/DVD OPERATION

This owner’s manual explains the basic instructions of this unit. Some DVDs are produced to limit operation during playback. For example, many DVDs do not allow users to skip government warnings, or in some cases previews or other features. This is not a defect in the unit. Refer to the instruction notes of discs.

“ ” may appear on the screen during operation. A “ ” means that the desired operation is not permitted by the unit or disc.

Playing a Disc

1.Slide the STANDBY/ON switch to the ON position. (Slide the ON/OFF switch on the monitor to the ON position.

See CUSTOMIZING THE DVD FUNCTION SETTINGS before proceeding to step 2.

2.Press the button and hold the front panel to open the disc door.

3.Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.

4.Push the disc door gently to close it. It takes a short while for your unit to load the disc. After loading, for most DVDs, the unit will automatically take you to the main menu or start playing. If the unit does not automatically start playing the DVD, press the PLAY button.

PLAYING A PICTURE FILE DISC

This unit can play picture files recorded on CD-R and CD-RW discs.

1.Press the button and hold the front panel to open the disc door.

2.Hold the disc by its edge and gently push it onto the spindle, with the label side facing the front, until you hear a “click”.

3.Push the door gently to close it. The picture files on the disc will be displayed one by one automatically.

4.Press the STOP button to go to the folder list.

5.Press the or button to highlight a file to play. Press the PLAY button to start playback.

Note:

•You can press the PAUSE button to interrupt playback, and press the PLAY button to resume playback.

•You also can use the GOTO function or use the numbered buttons to enter the image number to quickly select any image.

•Press the ANGLE button on the remote control to rotate the picture orientation by 90°.

Angle selection (DVD)

Some DVDs contain scenes that have been shot from a number of different angles. For these discs, the same scene can be viewed from each of these different angles.

1.While you are playing a DVD with different angles recorded, press the ANGLE button to view the number of current angles available.

2.Press the ANGLE button repeatedly to change the scene to the next angle in those recorded.

•About two seconds later, playback continues from the new angle selected.

•If no button is pressed within 10 seconds, playback continues without changing the current angle.

Sequence of angle shots

(Example)

Note:

•This function can only be used for discs on which scenes shot from multiple angles have been recorded.

•If only one angle is recorded, “ ” is displayed.

E - 14

811-798191W012.indd 14 4/1/2008 5:00:59 PM