Venturer PVS7980 DVD Programmable Playback, Customizing the DVD Function Settings, Language Setup

DVD PROGRAMMABLE PLAYBACK

Programmable memory

The two types of programmed playback provided by this unit is title/chapter programmed playback.

Title/Chapter programmed playback (DVD)

1.Press the MEMORY button in PLAY mode.

2.Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For example : 01 02, 02 05, 02 11) It will move to the next item automatically.

3.Repeat steps 2 to add additional titles and chapters.

4.Press the PLAY button to start the programmed playback.

CUSTOMIZING THE DVD FUNCTION SETTINGS

LANGUAGE SETUP

1. In STOP mode, press the SETUP button.

2. Use the or button to select the option (OSD

Language, Audio, Subtitle or Disc Menu), then

press the button. 3. Use the or button to select your preferred

language, then press the ENTER button to confirm.

4. Press the button to go back to the previous menu. Repeat steps 2 and 3 to adjust other options.

5. To exit the SETUP MENU and return to the normal screen, press the RETURN button.

Note:

•Some DVDs may not play in the audio language selected. A prior language may be programmed on the disc.

•Some DVDs may be set to display subtitles in a language other than the one selected.

A prior subtitle language may be programmed on the disc.

•Some DVDs allow you to change subtitle selections via the disc menu only. If this is the case, press the MENU button and choose the appropriate subtitle from the selection on the disc menu.

•Some DVDs may not included your pre-selected language. In this case, the DVD player automatically displays disc menus consistent with the disc’s initial language setting.

E - 17