Selecting the Input Source
Input sources must be selected manually. Below are the ways you can select the input source:
1)Press the Input button on the remote control to activate the input on- screen menu. Use the arrow buttons to select the desired input source and press OK.
2)Using the remote control, select PC RGB, HDMI, or Video source to select your source. If desired source is not selected, press multiple times to toggle through the input options.
OSD Menu Functions
Press the MENU button on the remote or the keypad to activate the OSD. Use the UP/DOWN/VOL+/VOL- buttons on the keypad or the UP/DOWN/LEFT/RIGHT buttons on the remote to navigate through the OSD submenus. The first menu to appear is the Picture Menu.
Picture Menu
Item | Selection Options |
|
|
Picture Settings | Brightness, contrast, tint, color, & sharpness: |
|
|
Color Temperature | 6500K/9300K/11000K/User |
|
|
Aspect Ratio | 4:3/16:9/Zoom 1/Zoom 2 |
|
|
Noise Reduction | Off/Low/Middle/High |
|
|
Screen (PC RGB only) | Auto Adjust: When selected, the image will be auto adjusted |
| Hor Pos, Vert Pos, Size, and Phase: |
|
|
Backlight | |
|
|
Color Range | 16~235, |
|
|
DMP Option | Auto play: On/off |
(USB only) | Show effect: Select from various slide show transition effects |
| Slide time: |
|
|
PS7050/PS7050T User Manual 10