Planar manual Locking the Remote, IR Sensor and LED Indicators, Turning the PS7050/PS7050T On

Page 9

Locking the Remote

To lock and unlock the remote control, hold the F1 button down for 10 seconds.

IR Sensor and LED Indicators

The IR sensor is located on the bottom right side of the front bezel. To operate the remote control, point the remote directly at the IR sensor. Make sure the batteries are installed in the remote before operation.

The LED indicator light is located in the IR sensor window. The following table explains the condition for each of the indicators.

LED Status

Condition

 

 

Green

Display turned on but no input detected

 

 

Red

Display turned off

 

 

Off

Display turned on and input detected

 

 

Using the Display in Portrait Mode

When looking at the rear of the display in landscape orientation, rotate the display counter-clockwise for portrait orientation . This will allow for proper ventilation. The directional indicator is located on the bottom of the product rating label for reference.

Caution: Improper ventilation may shorten the life of the display.

Using the Display in Flat Orientation

The PS7050 and PS7050T are not recommended for use in flat orientation for tabletop, floor, or ceiling installations. LCD panels of this size are at risk of panel deflection which can cause cosmetic sagging, brightness uniformity issues, and shortened life span.

Turning the PS7050/PS7050T On

1)Insert the power cord into the display and the power outlet.

2)Press the power button on the remote or keypad.

Turning the PS7050/PS7050T Off

With the power on, press the power button on the remote or keypad to put the LCD panel in a standby mode. To turn off power completely, disconnect the AC power cord from the power outlet.

Note: If there is no signal for a 10 minutes on a HDMI, DisplayPort, or Component signal or 1 minute on a VGA signal and the Auto Sleep OSD setting is set to On, the LCD panel will automatically go into standby mode.

PS7050/PS7050T User Manual 9

Image 9
Contents User Guide Table of Contents Introduction Safety InformationRecommended Usage What is Temporary Image Retention?Burn-In Versus Temporary Image Retention Normal Usage GuidelinesCleaning the PS7050/PS7050T Package ContentsVesa Mounts, General Description Installing an PS7050/PS7050T Contents of the Accessory KitPrepare Your Installation Location Operating the PS7050/PS7050T Signal Source InputsVideo Remote ControlUsing the Display in Portrait Mode IR Sensor and LED IndicatorsUsing the Display in Flat Orientation Locking the RemoteOSD Menu Functions Selecting the Input SourceOptionMenu Sound MenuTime Menu Playing Media FilesPlaying Videos Media Menu Bar When Videos are PlayingPlaying Image Files Media Menu Bar When Image Slideshows are PlayingRS232 Commands Connecting the RS232 CableRS232 Communication Touch Screen OperationSpecifications Signal CompatibilityDimensions PS7050 Dimensions PS7050T Troubleshooting Accessing Planar Technical SupportEMC Electro Magnetic Compatibility Certification

PS7050, PS7050T specifications

The Planar PS7050T and PS7050 are cutting-edge display solutions designed to meet the evolving demands of various industries, particularly in retail, hospitality, and corporate environments. These models are characterized by their advanced technology, robust features, and user-friendly interface, making them ideal for interactive and high-visibility applications.

The PS7050T features a 70-inch display with a 4K Ultra HD resolution, delivering stunning picture quality with vibrant colors and sharp details. Its large size enhances visibility, making it suitable for high-traffic areas where capturing attention is essential. The PS7050, while also providing impressive visuals, focuses on delivering high-performance specifications tailored for diverse use cases.

One of the standout features of the PS7050T is its interactive touchscreen capability. Utilizing advanced projected capacitive touch technology, this display allows for smooth, multi-touch operation, enabling users to engage directly with content. This interactivity fosters an immersive experience, ideal for kiosks, wayfinding applications, and interactive presentations.

Both models are equipped with advanced connectivity options, including HDMI, DisplayPort, and USB inputs, making integration with various multimedia sources straightforward. Additionally, they support multiple video formats and resolutions, providing flexibility for different content types. The inclusion of built-in speakers enhances the multimedia experience, making these displays suitable for applications that require audio-visual synchronization.

Durability is another critical characteristic of the Planar PS7050T and PS7050. Built for continuous operation, they feature commercial-grade components and reliability standards, ensuring optimal performance in demanding environments. The screens are also protected by anti-glare coatings, which minimize reflections, enhancing visibility in brightly lit areas.

The Planar PS7050T and PS7050 come with advanced management and control features, including network connectivity for remote monitoring and management. This capability allows IT administrators to troubleshoot and update the displays without having to be on-site, increasing efficiency and minimizing downtime.

In conclusion, the Planar PS7050T and PS7050 deliver a powerful combination of size, performance, and interactivity. Their robust features, including crystal-clear visuals, touch interactivity, extensive connectivity, and management capabilities, make them versatile tools for engaging audiences and enhancing communication in various professional settings. Whether used for advertising, information dissemination, or interactive displays, these models stand out as premier choices in the digital display market.