20
Touch ScreenDriver Installation
Follows are the procedures for touch screen driver setting up.
Windows Environment
1.Insert the
2.Follow the directions on screen to complete the driver setup for your version of Windows.
* If the AutoStart feature is not active:
1.Click Start > Run
2.Click the Browse button to locate the “touch.exe” program on the
3.Click Open, then OK to run the “touch.exe”.
4.Follow the directions on screen to complete the driver setup for your version of Windows.
DOS Environment
1.Insert the
2.From DOS, type d:\EloDW to change to the correct directory on the
2.Type “Install” and press “Enter” to start the installation.
3.Align the touch screen.