Installation Instructions, Connecting The Cables

INSTALLATION INSTRUCTIONS (cont.)

Connecting The Cables

	Figure 2	Connecting Cables
1.	AC Power Cord		2.	15-pin D-SUB Cable
3.	DVI Cable

Turn off your computer before performing the procedure below.

1.Connect the female end of the AC power cord to the AC-in port on the back of the monitor. Connect the other end to a nearby AC-outlet.

2.Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.

3.(Optional – Requires a video card with DVI port) Connect one end of the 24-pin DVI cable to the back of the monitor and connect the other end to the computer’s DVI port. be tightened.

4.Turn on your monitor and computer. If you monitor diplays an image, installation is complete. If not, refer to the FAQ (frequently asked questions) section for troubleshooting.