Installing/Replacing Scoring Blade, Riving Knife

5.Unlock the nut (NOTE: Left hand threads – loosen by turning clockwise).

6.Make sure the set screws in the adaptor are set flush on the blade side. (They should protrude to the rear to engage the arbor for positive drive). See Figure 16. Clean the mating surfaces, install new blade, and tighten arbor nut securely.

7.Remove locking pin (B, Figure 15) and close blade cover.

SAFETY TIP: Tape a red rag on the locking pin and drape it over the blade while pin is inserted. This will remind you to remove the pin before starting the saw!

Installing/Replacing Scoring Blade

1.Disconnect machine from power source.

2.Push sliding table all the way to the left and open blade cover.

3.Tilt scoring blade all the way, and place spanner (A, Figure 17) on the flat of the arbor.

4.Loosen the bolt with the hex wrench (B, Figure 17). (NOTE: Right hand threads-turn counterclockwise to loosen).

5.Mount scoring blade and re-tighten bolt. Close blade cover.

Riving Knife

The machine is equipped with a riving knife (A, Figure 18) for use with saw blades up to 315mm in diameter.

The purpose of the riving knife (or "splitter") is to prevent the kerf from closing as it leaves the cutting teeth, and thereby reduce the chance of the kerf coming in contact with the up-running teeth of the blade and causing binding or a dangerous kickback. When the forward edge of the workpiece reaches the riving knife, the knife also helps guide the rest of the cut and will prevent the up-running teeth from scoring the workpiece.

The riving knife must be adjusted so that over its entire length the gap between saw blade and riving knife does not exceed 3 to 8mm.

The riving knife can be adjusted in both vertical and horizontal directions. The highest point of the riving knife should never exceed 3mm above the highest placed saw blade tooth.

Use the central bolt (B, Figure 18) and the three adjustment screws (C, Figure 18). After adjustment, always lock the central bolt (B, Figure 18).

Figure 16

Figure 17

Figure 18

HPS67 specifications

The Powermatic HPS67 is an innovative and powerful hybrid table saw that epitomizes precision woodworking. Designed for serious woodworkers and professionals, the HPS67 integrates advanced technologies and features that elevate its performance and usability in the workshop.

At the heart of the HPS67 lies its robust motor, offering a remarkable power output that facilitates seamless cutting through a variety of materials, including hardwoods and composite materials. The saw’s rip capacity is impressive, allowing users to cut wide panels with ease and precision. Its well-engineered design supports both rip cuts and crosscuts, making it versatile for different woodworking projects.

One of the standout features of the Powermatic HPS67 is its advanced dust collection system. The saw is equipped with an efficient dust port that captures debris during cutting, ensuring a clean workspace and promoting a healthier environment for users. This system reduces the overall cleanup time and increases visibility while working.

The HPS67 incorporates an innovative digital display that provides real-time feedback on blade height and angle adjustments. This feature allows for precise settings, ensuring that users can achieve the exact cuts they desire consistently. The easy-to-read display enhances the overall user experience, making it simpler to make quick adjustments on the fly.

Furthermore, the HPS67 boasts a large, sturdy table surface that offers ample support for large sheets of wood. The tabletop is made from high-quality cast iron, known for its durability and stability. This material minimizes vibrations during operation, thus contributing to the saw's accuracy.

Safety is paramount with the Powermatic HPS67, which features a comprehensive set of safety guards and notifications. The blade guard is designed for easy removal and replacement, ensuring that operators can maintain safety without hindrance to workflow. Additionally, the built-in safety features minimize the risk of accidents, providing peace of mind for woodworkers.

In summary, the Powermatic HPS67 is a sophisticated hybrid table saw that combines power, precision, and safety. Its exceptional features, advanced technologies, and user-focused design make it an invaluable addition to any woodworking shop. Whether for professional use or serious hobbyists, the HPS67 empowers users to take on a variety of woodworking projects with confidence and efficiency.