USER’S MANUAL
menu screen. Pressing MODE/MENU button again, the following menu screen will be displayed.
5-5-1. Page 1 GENERAL Menu
The following items can be adjusted or programmed on this menu screen.
[ GENERAL ]
TIME | : 00:00:00 |
DATE | : 01/01/2002 |
DATE FORMAT | :MM/DD/YYYY |
TIME DISPLAY | : [Y] |
TITLE DISPLAY | : [Y] |
BOUNDARY LINE | : [Y] |
BLANK COLOR | : [BLUE] |
ALARM TIME | : OFF |
EXIT | : [Y] |
- PAGE1 -
Fig 6. Page 1 Menu
a.Set the TIME
-Place the cursor to the time digit using the ◀ or the▶
buttons, and press the ENTER button to flash the TIME (HH:MM:SS) and set it using the ▲ or the ▼ buttons. Press the ENTER button again to stop flashing the TIME.
- Use the ◀ and the ▶ buttons to shift the cursor to the next digit.
-The TIME is displayed in military form of time.
-Press ENTER button the EXIT location to exit in this mode, the splitter will display the quadrant pictures.
b.Set the DATE
-Place the cursor to the date digit using the ◀ , ▶ ,▲ and the ▼ buttons, and press the ENTER button to flash
-Connect the DC power cord between this splitter and your
13wall mounted power outlet.
-Turn on the power of all cameras and this splitter.
-A quadrant display should be seen on the monitor.
This splitter may be installed with a standard VCR or a Time Lapse Recorder. Perform following steps to install the splitter with them.
VIDEO OUT VIDEO IN
VCR (Rear view)