D.Option Wall Mount Kit
Select a flat surface on wall of adequate strength and with proper ventilation and space condition. Please use the right material to hold this monitor according to the wall material (Drywall,
concrete, solid wood, etc). Consult with |
|
|
your contractor if it is necessary. Please fix |
|
|
|
| |
holes circled in the picture to the wall or | Front Side | Back side |
fix it to a VESA joint at bosses on back | ||
side. |
|
|
VII. DRIVER INSTALLATION
A.INSTALLATION
The USB interface touch controller operates as an USB mouse without need for any special driver in Windows. However, there is a program supported for its calibration and touch function manipulation. Please find it in the attached
Posiflex product information
For Linux environment, please find the setup program for the suitable kernel in the same directory and install the required driver and calibration program as the setup program proceeds.
B.SETUP/CALIBRATION
a. USB touch manager(For TM-7115/7115N)
Once the USB control program is installed, the user can utilize it to calibrate the touch screen, define mouse button emulation parameters, enable right button emulation or define the click sound’s tone and duration. Please go to “Program Files” and select “Posiflex USB Touch Tools” and then select “Posiflex USB Touch Manager” within the tools to engage this utility. Most items in this utility should be easily understandable to average user. Followings are just some reminders on some items.
Calibrate – This button engages the “Posiflex USB Touch Calibrator”.
Hide Cursor – This button hides or shows the mouse cursor on screen display. Please never hide cursor before the touch is enabled and calibrated.
Restore Defaults – This button resets all touch parameters to default settings.
Part 5