Edge Accel. – This function engages the “Posiflex USB Touch Edge Acceleration Tool” and helps to find the hidden taskbar or thin scroll bar through touch.
Enable Touch – This check box must be checked to have the touch panel working.
Enable Touch_to_Calibrate – This check box provides a shortcut for touch calibrator by holding touch for a programmed time delay. However, this function denies the touch mode of “Click on Release”.
Enable Buzzer – This check box enables the internal buzzer beep as response to touch on touch panel.
Enable Frequency – This selection box selects the buzzer tone by up/down arrows beside the box.
Enable Duration – This selection box selects the length for the touch beep by up/down arrows beside the box.
Double Click Area – This selection box selects the size of touch point on touch panel by up/down arrows beside the box. A too small touch size makes the double click operation difficult. A too large touch size results in unsatisfactory touch accuracy.
Time delay to Touch_to_Calibrate – This selection box defines the touch time required for a shortcut to Touch Calibrator by up/down arrows beside the box when the “Enable Touch_to_Calibrate” check box is checked.
Touch Mode Setting – Only one of the three radio buttons can be selected. The mouse emulation refers to the drag and drop function.
OK – This button accepts all parameters set and closes the utility window.
Apply – This button accepts all parameters set and remains in the utility window.
Cancel – This button discards all changes to the parameters and closes the utility window.
Help – This button provides explanations.
b. USB touch calibrator
This program helps
c.USB touch edge acceleration tool
Helps to find the hidden taskbar or thin scroll bar through touch
Enable ... – Each check box determines whether or not to engage edge acceleration against which edge of screen.
Margin – This list button selects the range to engage edge acceleration toward the edge before the edge is reached.
Part 6