ACR Electronics ZE-NES14 user manual Radio Mode

Page 12

RADIO MODE

SELECT RADIO AS PLAYING SOURCE

Open the SOURCE MENU and then touch the RADlO icon.

SELECT ONE RADIO BAND

Press the [BAND] key on the display panel or on the remote control or touch the [BAND] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2.

AUTO TUNING

Press the []/[] key on the display panel or on the remote control or touch the []/[] icon on the user interface to seek a higher/lower station. To stop searching, repeat the operation above or press other keys having radio functions.

￿NOTE:

When a station is received, searching stops and the station is played. If the unit receives a stereo broadcasting, the indicator light of stereo 'ST' on the TFT or on the LCD display will be lighted.

MANUAL TUNING

During manual tuning, the frequency will be changed in steps. Press the []/[] key on remote control or touch the []/[] icon on the user interface to tune in a higher/lower station.

Touch the numeric keypad icon [S] and then touch the numeric buttons to input the radio station frequency numbers.

AUTO SAVE

Only stations with sufficient signal strength will be detected and stored in the memory. When the monitor is closed, press and hold the [AS/PS] key on the display panel.

When the monitor is opened, touch the [AS] icon on the user interface.

To stop auto save, press other keys having radio functions.

￿NOTES:

After auto save, the previous saved stations will be overwritten.

The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; hence the unit can store 30 stations in total.

12

Image 12
Contents Model N0 Contents ZE-NC514 Page Precautions DeclarationBefore Using Front PanelAV-IN jack USB Slot Disc indicator Repeat mode indicatorRadio status indicators Auxiliary LCDRemote Control TiltUninstall Battery Install BatteryBasic Operations Using the TFT Monitor Reset the UnitDisplay System Time Radio Mode Manual Save Preview ScanRecall the Stored Stations Local SeekingRDS Operations AF FunctionTA Function Program Service PS PTY FunctionCT Clock Time RT Radio TextDisc Mode Insert a DiscEject the Disc Touch Screen ControlsOnscreen Control Buttons PBCSuspend Playback Stop PlaybackDisplay File List Fast PlaybackRepeat Playback Repeat A-BRandom Playback Intro Playback Direct SearchGoto Search DVD Menu and Tltle Select Subtitle LanguageSelect MULTI-ANGLE Views Select Audio ChannelZoom IN/OUT Rotate PicturePlayback Information For DVDFor VCD USB Mode Select USB AS Playing SourceChange Folder Ipod Mode Select Ipod AS Playing SourceMusic Playback Photo PlaybackVideo Playback DVB-T Mode Select DVB-T AS Playing SourceQuick Select Search ChannelOther Modes AV-INCamera Setup Setup Procedures 1. Enter setup modeSelect one sub-menu Select one itemGeneral Language OSDAudio DRC RDSTA VOL RatingMethod of Changing Password Procedures of Changing the RatingHardware VOLSource LevelMethod of Changing Passwort Please NoteEnter the EQ setup mode Select EQ modeAdjust EQ parameters Adjust Front/Rear/Left/Right fader and balanceTroubleshooting Troubleshooting Device Connections Control Cables Auto Brightness ControlTelephone Mute Reverse DrivingGearbox Installation and Uninstallation Unit InstallationMethod B Trim Ring Installation UninstallDisassemble trim ring Disassemble the UnitSpecifications GeneralDVD Player AudioVideo TFT MonitorNavigation EnvironmentDo not use irregular shaped disc Disc Cleaning When playing a new discAppendix Region CodeWiring Connections Years Limited Warranty Warranty LimitationsZenec Model ZE-NC514 Zenec by ACR AG · Bohrturmweg 1 · Bad Zurzach · Switzerland