ZE-NC514
PRECAUTIONS
1.Never disassemble or a djust the unit without any professional guide. For details, please consult an authorized ZENEC dealer for inquiry.
2.lf the front panel or TFT monitor is squalid, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and
3.lf any abnormal behavior of the unit is found, please refer to trouble shooting guide of this manual. lf no relevant information is found, please press the [RESET] key on the front panel to resume factory default.
4.lf you have parked the car in hot or cold weather for a long time, please wait until the temperature in the car becomes normal before operating the unit.
5.Using
6.No fierce mechanical impact to the LCD monitor when it is in open position for preventing the damage to any mechanisms inside.
7.To prevent damage to the screen, avoid touching it with sharp objects.
8.The monitor employs auto motorizing mechanism, please don't push, pull, or swivel the monitor manually to prevent damage to the core mechanism.
9.To provide a clear demonstration and an alternative for easy understanding to the operation of this unit, graphic illustrations are used. However, these illustrations may be different from the actual images displayed on the screen.
10.During operating the unit, " 
" will display if the current operation is not available or illegal.
11.Operate the unit correctly according to this manual to prevent unnecessary problems. The guarantee won't be valid if the problem is caused by inappropriate operation.
DECLARATION
This product incorporates copyright protection technology that is protected by U.S patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.
Reverse engineering or disassembly is prohibited.
5