Alpine NVE-N852A, 68-00493Z15-B, VPE-S431 owner manual Case of Difficulty

Page 13

Information

In Case of Difficulty

If you encounter a problem, please review the items in the following checklist. This guide will help you isolate the problem if the unit is at fault. Otherwise, make sure the rest of your system is properly connected or consult your authorized Alpine dealer.

No function or display.

Car's ignition is off.

-Turn the ignition on.

No fuse or blown fuse.

-Check the cause and replace the fuse.

Incorrect connections.

-Check connection and remedy.

Vehicle's battery is weak.

-Check the voltage of vehicle's battery.

Unclear picture display.

Fluorescent tube is exhausted.

-Replace the fluorescent tube*.

No picture display.

Brightness control is set for minimum brightness control.

-Adjust the brightness.

Incorrect setting of the VCR mode.

-Switch to the correct mode.

Protective circuit is on because of high temperature.

-Wait until the temperature inside the vehicle comes down to the operating temperature range (45°C).

Incorrect or open connection with the Monitor, AV interface unit.

-Check the connection and remedy.

Picture color is poor.

Brightness/Color/Tint control are not set to the proper positions.

-Check each control.

Spots or dotted lines/stripes appear.

Caused by neon signs, high-voltage power lines, CB transmitter, other vehicle's ignition plugs, etc.

-Change the location of your vehicle.

Unit does not operate.

Monitor's power is not turned on.

-Turn on the monitor's power.

Navigation screen is not displayed or navigation system’s remote controller keys do not work.

Navigation system’s power is turned off.

-Press the ON/OFF (POWER) button on the navigation system’s remote controller to turn the navigation system’s power on.

*The fluorescent tube replacement is not free of charge even within the warranty period, for the tube is an article of consumption.

11-EN

Image 13
Contents TME-M770 Page Contents USE the Correct Ampere Rating When Replacing Fuses Fuse Replacement TemperatureMaintenance Installation LocationAdjusting the Volume Switching the SourceScreen Display ON/OFF Setup Operation Other Useful FeaturesOther Useful Features Visual Eqtm Operation Tint tone adjustment TintTouch Visual EQ Changing to Another Product’s Source Remote Control SensorOperating a DVD in the IVA-D300 Operating Other ProductsIf a TV is operated a TV tuner is connected Operating the DVA-5210 and the DHA-S680Case of Difficulty AV Interface Unit SpecificationsInstallation and Connections Precautions Velcro fastener Mounting Installing AV Interface UnitAttaching with screws Attaching a monitor to the inner case Mounting the monitor to the headrestCushion 170 x 10 x Detaching the monitorBasic connection ConnectionsACC power lead Red 45Remote control output lead White/BrownVideo input connector AUX Video input connectors AUXHead unit System ConnectionsMain unit monitor Main unit B.BOX TME-M770 Main unit and head unit IVA-D300Page Limited Warranty Garantie Limitée