Alpine VPE-S431, 68-00493Z15-B, NVE-N852A owner manual Other Useful Features

Other Useful Features

3 Rear monitor select function (AUX OUT)		9 Dimmer LOW level adjustment (DIMMER
LINK : Output the video/audio portion		LOW LEVEL)
shown on the main monitor, to the		Adjusts the LOW LEVEL (0 (MIN) to 15
rear monitor.		(MAX)) of the dimmer.
AUX1 : Output the AUX1 video/audio to the
rear monitor.		p Touch panel adjustment (SCREEN
AUX2 : Output the AUX2 video/audio to the		ALIGNMENT)
rear monitor.		Adjust if the LCD display position and touch
4 Change sound output (SOUND OUT)		panel position do not match.
		: Reset to default settings.
MONITOR	: Outputs sound through the
		: Changes to adjustment screen. The
	built-in speakers.
		adjustment method is as follows.
HEADPHONE	: Outputs sound to
		1) Touch from SCREEN ALIGNMENT.
	headphones if connected.
		The screen changes to the adjustment
* Note that sound will not be output unless
		screen.
the audio output settings are appropriate.
		2) Touch the	mark on the lower left side
5 External input sound level adjustment		of the screen.
		The adjustment screen switches.
(AUX IN 1 LEVEL/AUX IN 2 LEVEL)
		3) Touch the	mark on the upper right side
HIGH : Sets the sound level at a high level.		of the screen.
LOW : Reduces the sound level.		When the adjustment is finished, the
6 External input name setting (AUX IN 1		screen returns to the SETUP screen.
MODE/AUX IN 2 MODE)		• If you touch RETURN on the adjustment screen,
Select the name from the following list, to be		nothing is adjusted and the screen returns to the
		SETUP screen.
used for the product using the external input
		6 When the settings are completed, touch
mode. This will apply to the touch switch
name at source selection time and the
		RETURN.
source name during playback change.
		The screen returns to the source selection
OFF/TV/EXT.DVD/GAME/AUX 1 (2)/LINK		screen.
(AUX 1 MODE only)

•Set to “LINK” when an IVA-D300 or VPE-S431 is connected. (Be sure to connect to the “AUX IN 1” connector.)

•Set to “EXT.DVD” when a DVA-5210, DVA-5205, DHA-S680 or the like is connected.

•Set to “TV” if a TV tuner is connected to this product.

•The way the source operation screens and the source selection screen switches when “CONTROL” is touched differs according to the selected mode. (See page 4 “Switching the Source”, step 2.)

7Navigation settings (NAV. IN)

When the navigation is connected, set to ON.

8Dimmer HIGH level adjustment (DIMMER HIGH LEVEL)

Adjusts the HIGH LEVEL (16 (MIN) to 31 (MAX)) of the dimmer.

6-EN