1Foot brake lead (Yellow/Black)
Connect this lead to the foot brake lead powered when the foot brake is pressed.
2Hand brake lead (Yellow/Blue) Connect this lead to the hand brake lead powered when the hand brake is pulled.
3Monitor control lead (White/Pink) Connect when upgrading with touch panel compatible products such as the
45Remote control output lead (White/Brown)
To remote control input lead of ALPINE products used in the system.
6Reverse Lead (Orange/White)
Use only when a
Switches the video picture to the
7ACC power lead (Red)
To ACC power lead powered when engine key position is ACC.
8Fuse (7.5A)
9Ground lead (Black)
Connect the lead to a good chassis ground on the vehicle. Make sure the connection is made to bare metal and is securely fastened using the sheet metal screw provided.
pFoot brake lamp
qBrake connector (Included)
wFoot brake lead
eFoot brake switch
rHand (parking) brake lamp
tHand (parking) brake lead
yHand (parking) brake switch
uHeadphone
iMain monitor
oConnection cable ; RGB cable
aTo RGB output terminal
sMade by Alpine navigation
dAudio input connectors (AUX 1)
Use these connectors to input the audio signals from a DVD player, video deck etc.
fVideo input connector (AUX 1)
Use this connector to input the video signals from a DVD player, video deck etc.
gAudio input connectors (AUX 2)
Use these connectors to input the audio signals from a DVD player, video deck etc.
hVideo input connectors (AUX 2)
Use this connector to input the video signals from a DVD player, video deck etc.
jAudio output connectors
Use these connectors to output audio signals to a rear monitor, etc.
kVideo output connector
Use this connector to output video signals to a rear monitor, etc.
•When connecting to an
To prevent external noise from entering the audio system.
•Locate the unit and route the leads at least 10cm away from the car harness.
•Keep the battery power leads as far away from other leads as possible.
•Connect the ground lead securely to a bare metal spot (remove the coating if necessary) of the car chassis.
•If you add an optional noise suppressor, connect it as far away from the unit as possible. Your Alpine dealer carries various Alpine noise suppressors, contact them for further information.
•Your Alpine dealer knows best about noise prevention measures so consult your dealer for further information.