AMX VTM-D15/A instruction manual Rear Panel Components

Page 11

MultiMedia Touch Panel

Specifications (Cont.)

Rear Panel Components:

TP3-VID (default card)

TP3-RGB (optional)

TP3-VGA (optional)

Mouse Port

Monitor Out (VGA)

Monitor Out (RGB)

Use the TP3-VID input module in any input slot to connect video sources, such as VCRs and DVDs. The module is secured by two black thumbscrews.

Composite LED indicator (turns on when composite video input is detected). The Composite video input types are: NTSC, SECAM, or PAL.

Composite input connector

S-Video LED indicator (turns on when S-Video input is detected).

S-Video input connector

500 mA power consumption

Use the TP3-RGB input module in any input slot to connect RGB-type sources. The module is secured by two black thumbscrews.

5-BNC input connectors: R (Red), G (Green), B (Blue), H/HV (Horizontal/ Composite sync), V (Vertical sync)

500 mA power consumption

The TP3-RGB input module accepts the following configurations:

Red, green, blue, horizontal sync, vertical sync

Red, green, blue, composite sync (on H/HV connector)

Red, green, blue, with sync on green signal

To achieve the best video quality on the VGA and RGB modules, use an alter- nating pixel pattern to fine tune the picture.

Use the TP3-VGA input module in any input slot to connect VGA-type sources (common for PCs). The module is secured by two black thumbscrews.

One HD-15 input connector

500 mA power consumption

The TP3-VGA input module accepts the following configurations:

Red, green, blue, horizontal sync, vertical sync

Red, green, blue, composite sync

Red, green, blue, with sync on green signal

RS-232 (DB-9) 9-pin serial port. The 9-pin serial port is used to connect a pointer device, such as a serial mouse. The AXB-TPI/3 also supports several external serial touch devices such as some touch pads, touch-sensitive monitors, and tablets. Refer to FIG. 3 on page 9 for more information.

HD-15 VGA output connector. The AXB-TPI/3 contains two types of GUI output connectors: DB15 and 5-BNC RGB output connectors. VGA connection is done through the use of the VGA (HD-15) monitor output for VGA-type moni- tors (common to PCs). Connect the VGA output monitor's HD-15 (female) con- nector to the VGA connector (male) on the rear panel of the AXB-TPI/3.

RGB connection is done by using the five BNC output connectors (from left to right) red (R), green (G), blue (B), horizontal sync (H), and vertical sync (V). Connect the RGB output monitor's 5-BNC connectors to the RGB connectors on the rear panel of the AXB-TPI/3.

RGB (5-BNC) output connectors

Red, Green, Blue, Horizontal Sync, Vertical Sync

VTM-D15/A 15" MultiMedia Touch Panel Systems

7

 

 

 

 

Image 11
Contents VTM-D15/A AMX Limited Warranty and Disclaimer Table of Contents Upgrading the TPI/3 Firmware MultiMedia System Components MultiMedia Touch PanelPin Mini Din to 9-pin DB9 Touch Panel Signal Cable Power AdapterPower Cord Pin DB15 VGA Signal CableFloppy Disk VTM-D15/A and VTM-D15/AB SpecificationsSpecifications PSN6.5 Power Supply optionalIBM VGA Rear component connection locations on the VTM-D15/A VTM-D15/A and VTM-D15/AB Rear ComponentsFront Panel AXB-TPI/3 SpecificationsDimensions HWD Rear Panel Components SendCommands Rgbhv AXB-TPI/3 ComponentsPin captive-wire VTM-D15/A Sample ConfigurationRemoving input modules Installation and WiringSetting up the AXB-TPI/3 Installing the input modulesMounting the TPI/3 in an equipment rack Setting up the PanelInstalling the Table Top support bracket Table Top Installation VTM-D15/A and D15/ASFixing holes on each side of pull-out flap Installing the Surface Mount support bracket Surface Mount Installation VTM-D15/AB and D15/ASBConnecting the cables on a VTM-D15/A table top panel Surface Mounting Kit VTM-WMB contents Rear of VTM-D15/AB shown with attached VTM-WMB bracket Connecting the cables on a VTM-D15/AB surface mount panelPreparing captive wires Wiring the AXB-TPI/3Using the AXlink connector for data and power Wiring guidelinesPin Signal Function Connecting the MultiMedia ComponentsUsing the VGA in DB-15 male high-density connector VGA in DB-15 Connector PinoutsYour system is now connected and receiving power Installation and Wiring Front Panel buttons and indicators LEDs Configuration and SetupVTM-D15/A Startup and Setup Procedures Using Axcessx for serial communication Setting Up Serial Communication from PC to the TPI/3Setting Up Serial procedures Parameter Setting COM Port Parameter SettingsUsing HyperTerminal for serial communication Setting up the VTM-D15/A touch device Supported Touch Devices Setting the Output ResolutionAvailable Resolutions Resolution Refresh RatesCalibrating the Monitor Setting Up AXlink Communication from Master to the TPI/3Setting Up AXlink procedures Setting up the VTM-D15/A touch device through AXlink Using Axcessx for AXlink communicationUsing HyperTerminal for AXlink communication Use the following command to set the mouse driver Setting Up NetLinx Communication from PC to the TPI/3Set the Output resolution of the TPI/3 by entering Using NetLinx Studio for communication via an COM Port SendCommand 130,’calibrate’ Configuration and Setup Downloading the Firmware ConfigurationUpgrading the TPI/3 Firmware Press F10 to exit the SoftROM program On Screen Display OSD Icons On Screen Display OSD FeaturesOn Screen Display OSD Icons Selecting the Language of the OSD Exiting the OSDAdjusting Display Performance Phase and Clock Adjusting Screen Brightness and ContrastSelecting the Picture Color Temperature Adjusting Horizontal and Vertical Screen PositionAdjusting OSD Menu Parameters OSD Position and Timer Adjusting Display Color Red, Green, BlueAdjusting the OSD Timer setting Adjusting the Picture SharpnessOptimizing Picture Performance in DOS Graphic/Text Automatic Contrast AdjustmentReturning Recall to Factory Default Settings Troubleshooting TroubleshootingDisplay Troubleshooting Use these messages to address panel issues Troubleshooting VTM-D15/A 15 MultiMedia Touch Panel Systems 12/02
Related manuals
Manual 52 pages 36.75 Kb

VTM-D15/A specifications

The AMX VTM-D15/A is a next-generation armored vehicle designed for versatility and adaptability in modern combat scenarios. Developed to meet the evolving demands of modern military operations, it embodies advanced technologies and exceptional characteristics that make it a standout choice for armed forces worldwide.

At the heart of the AMX VTM-D15/A is its robust chassis, designed to withstand harsh terrains and explosive devices. The vehicle boasts a well-protected hull using advanced composite materials and ballistic plating, ensuring crew safety in hostile environments. It can be fitted with reactive armor systems that enhance protection against projectiles and anti-tank missiles.

The VTM-D15/A features a powerful engine that provides high mobility across various landscapes, capable of reaching speeds of up to 100 km/h on flat terrain. Its off-road capabilities are complemented by a sophisticated suspension system that allows for excellent maneuverability in rugged conditions. The vehicle is also equipped with all-terrain tires, further enhancing stability and traction.

One of the remarkable aspects of the AMX VTM-D15/A is its modular design that allows for quick configuration changes between various combat roles. This adaptability permits the integration of different weapon systems, including machine guns and anti-tank guided missiles, that can be rapidly mounted or dismounted as per operational requirements.

The vehicle's advanced battlefield management system improves situational awareness, allowing for real-time data sharing and communication with other units. It is equipped with state-of-the-art sensors and reconnaissance tools, ensuring that it can gather intelligence and operate effectively in diverse combat environments.

Moreover, the AMX VTM-D15/A emphasizes crew comfort and ergonomics, featuring a spacious interior designed for extended missions. The vehicle's climate control systems and noise-reduction technologies significantly enhance crew endurance and focus in prolonged operations.

In a world where military operations are increasingly dynamic, the AMX VTM-D15/A stands out as a versatile, powerful, and technologically advanced armored vehicle. Its combination of protection, mobility, and adaptability ensures that it can meet a wide array of mission requirements, making it a vital asset in modern military arsenals.