Audiovox Car DVD Player/Monitor Combo Operation, Channel Tuning SET UP, Positioning the Screen

Page 13

Operation

CHANNEL TUNING SET UP

In addition to normal broadcast reception of VHF and UHF channels, if you are a Cable TV subscriber, your new TV is capable of receiving many unscrambled Cable channels without the use of a converter box. When set to broadcast TV, it receives CH2-CH69. When set to one of the CATV modes (STD, HRC, or IRC) it receives CH1-CH125.

NOTE: Most cable companies broadcast in STD Mode.

POSITIONING THE SCREEN

Pivot the screen forward until a comfortable viewing angle is reached. The screen may also be rotated from side to side. Do not force the screen beyond its rotational limit. The VE1040 is now ready for use.

Pressing the ON/OFF button on the TV or the remote will turn the system on or off. Remember to turn the unit off and pivot the screen to the closed position when not in use.

SETTING THE TIME

NOTE : The VE1040 must be turned off (except when SETTING THE PRESETS).

1)Press the SET button and the minutes will flash.

2)Use the UP and DOWN buttons to set the minutes.

3)Press the LEFT/RIGHT buttons to toggle between the hour and minutes.

4)Use the UP and DOWN buttons to set the hour(Check AM/PM indicator).

5)Press the ON/OFF button to return to the time display.

SETTING and ACTIVATING the ALARM

NOTE : The VE1040 must be turned “OFF” when performing the following procedure.

1)Press the SET button(1) twice and VE1040 should enter the alarm mode as indicated by alarm; present time will be displayed with the minutes portion blinking.

(Alarm ACTIVATED mode, Alarm indicator “ALM” on).

NOTE : If alarm and a series of dashes appear ( alarm Deactivated mode) press the T/F button (2) once to switch to the alarm activated mode.

2)Press the LEFT/RIGHT buttons to select the hour or minute for adjustment. When setting the alarm, check the AM/PM indicator to assure the proper setting.

3)Use the UP and DOWN buttons to adjust the hours and minutes.

4)Press the ON/OFF button. The alarm is now set and activated.

Once the alarm is set it will sound each day at the same time as long as it is activated.

-13 -

Page 12 Page 14
Image 13
Page 12 Page 14
Contents OWNER’S/INSTALLATION Guide Model No Serial No IntroductionImportant Safety Instructions Important Safety Instructions Important Safety Instructions USE minimun No AWG wire for telephone interconnect cable Cable System Installation MarkingIf the unit has been exposed to water Undercabinet Product MarkingTable Of Contents Included in this kit Under Cabinet Installation Microphone Permits hands-free speaker phone operation Front Panel ControlsTEL Jack Receives the Phone Pstn Line Input Rear Panel ControlsLCD Control Functions Setting the Time Channel Tuning SET UPSetting and Activating the Alarm OperationPress the SET button twice to enter the alarm mode Deactivating the AlarmPress the Power button. The alarm is now deactivated Setting the Alarm TonesSetupap Channel UP/DOWN Select Remote Control FunctionsDVD AM/FM Digit 0 -9 Select 20 FR 21 FF Zoom 23 A-B AudioTV Menu DVD MenuRadio Menu Setting the Presets for AM and FM or TV Modes Setting the Cable TV ModeSetting the Speaker Mode Modes Of OperationSearching for a Specific Scene /Song by Using Chapters Using the Remote Control FunctionsInserting and Ejecting the Disc Playback and StopRepetitive Playback-To Repeat a Specific Section Viewing a Menu Installed in DiscsChanging the Subtitle Language Changing the Vocal LanguageViewing the Playback Time, Title and Chapter Status Viewing the Setup MenuTo use the Setup menu Using The Setup MenuGeneral Setup Dolby Digital Setup OP Mode Speaker Setup DownmixDisc Menu where available languages depend on disc PreferencesDefinition of Terms Title Definition Of TermsSeveral chapters compose a Title DialoguesTroubleshooting Check List General Technical SpecificationDisplay Disc Available
Top Page Image Contents